Lighting Installation Adelaide
Licensed Adelaide electricians on contractor licence PGE 273919. No call out fee, a fixed quote before we start, and a lifetime warranty on labour. Call 1300 632 094.
Good lighting changes how a home feels and how much you pay to run it. Our licensed team handles every part of lighting installation in Adelaide, from swapping tired halogens for LED downlights to wiring pendants over a new kitchen island, running garden and sensor lights, and fitting dimmers that actually work with modern fittings. Whether you want one room brightened or a full layout planned across the house, we do the wiring, the fittings and the certificate of compliance.
Every job is done by a licensed Adelaide electrician working to AS/NZS 3000, under electrical contractor licence PGE 273919. There is no call out fee, you get a fixed quote before we start, and we back our work with a lifetime warranty on labour. Call 1300 632 094 to book a lighting electrician or ask a quick question.
Lighting Services We Install Across Adelaide
We cover the full range of residential and light commercial lighting, so you can sort a single fitting or a whole property with one team. Common jobs include:
- LED downlight installation and halogen to LED upgrades
- Pendant lights, feature lighting and chandeliers
- Indoor lighting for kitchens, bathrooms, living areas and stairs
- Outdoor, garden, verandah and deck lighting
- Sensor lights, security lighting and floodlights
- Dimmers, timers and smart lighting controls
- Exit and emergency lighting for shops and offices
- New lighting circuits for renovations and extensions
If a job turns up an overloaded circuit or an old board that cannot take the extra load, our switchboard upgrade team can bring it up to standard on the same visit.
LED Downlights and Halogen to LED Upgrades
Halogen downlights are the biggest quiet cost in a lot of Adelaide homes. Each old 50 watt globe runs hot, blows every year or two, and a ceiling full of them adds up fast on the power bill. A modern LED downlight draws a fraction of the power, lasts far longer, and runs cool.
The heat is the part people miss. Old halogen fittings get hot enough to scorch timber and ceiling insulation, which is a genuine fire risk in older roof spaces. When we upgrade, we fit insulation contact rated LED downlights that can sit safely under batts, and we remove the old transformers instead of leaving them buzzing in the roof.
Not every LED downlight is equal. Cheap fittings flicker, buzz or shift colour within a year. We fit reliable units and match the colour temperature to the room, warm white around 3000K for bedrooms and living spaces, cooler for kitchens, garages and workshops.
Indoor, Pendant and Feature Lighting
The right fixture in the right spot does more than any single downlight. We hang pendants over kitchen benches and dining tables at the correct height, wire in wall lights and reading lights, and install feature pieces and chandeliers safely, including the extra bracing a heavy fitting needs in a plaster ceiling.
Layered lighting is where a room really comes together, mixing general downlights, task lighting over benches and softer feature lights on their own switch. We plan the layout with you so each layer runs independently and the switching makes sense. If you also want air movement in the same room, our ceiling fan installation team can coordinate both.
Outdoor, Garden, Sensor and Security Lighting
Outdoor lighting has to earn its keep and survive an Adelaide summer plus coastal salt air near the beaches. We install weather rated fittings for verandahs, pergolas, decks and alfresco areas, plus garden and path lighting that lifts the whole yard after dark.
For security, sensor lights and floodlights are the practical choice. We position motion sensors so they trigger on the driveway and side gates without lighting up every time a cat walks past, and we can put them on timers or dusk to dawn switching. Some jobs need a fresh weatherproof point outside first, which our power point installation team handles at the same time.
Dimmers, Layout Planning and Energy Savings
Dimmers are where a lot of LED jobs go wrong. Old dimmers were built for halogen loads and will make LEDs flicker, hum or refuse to dim down. We fit trailing edge dimmers matched to your LED fittings so they run smoothly from full bright to a low glow.
Planning the layout properly is what separates a lit room from a well lit one. We look at where the light is actually needed, how many fittings the space wants, and how to group them on switches and dimmers.
The energy saving is real. Moving a house from halogen to LED cuts lighting power use sharply, and long life fittings mean far fewer trips up the ladder to change globes. We are happy to walk you through the likely savings before you commit.
Older Adelaide Homes and AS/NZS 3000 Compliance
Adelaide has a lot of character homes, from bluestone villas in the inner suburbs to solid brick places out through the eastern and northern areas. These homes are lovely to live in and fiddly to light. Lath and plaster ceilings, limited roof access, old wiring and the odd length of rubber or cloth insulated cable all shape how we approach a job.
We check the wiring before adding load, and we will not hide a problem behind a shiny new fitting. Every lighting installation is tested and certified to AS/NZS 3000, and you get a certificate of compliance for the work. That paperwork matters for insurance and when you sell.
Our licensed electricians work right across the metro area, including suburbs like Norwood, Prospect and Magill, as part of our wider Electrician Adelaide service.
How Much Does Lighting Installation Cost in Adelaide?
There is no single price for lighting work because a one for one downlight swap is a very different job to wiring a new circuit for a renovation. The honest answer is that it depends on the fittings, the number of lights and what the ceiling and wiring are like once we get up there. Here is what actually drives the cost.
| Factor | Why it affects the price |
|---|---|
| Number of fittings | More lights means more labour and more materials, though a batch of downlights usually works out better per light. |
| Type of fitting | A basic downlight is quick; pendants, chandeliers and feature lights take longer to mount and level. |
| New circuits or existing wiring | Reusing sound wiring is cheaper than running a fresh circuit back to the board for a renovation. |
| Ceiling access and site conditions | An open roof space is easy; tight access, two storey work or a plaster ceiling adds time. |
| Dimmers and controls | Trailing edge dimmers, timers and smart controls add parts and setup. |
| Switchboard capacity | An old or full board may need an upgrade before extra lighting can be added safely. |
| Supply or install your own | We can fit fittings you have bought or supply quality ones ourselves. |
You always get a fixed quote before any work starts, so the figure you agree to is the figure you pay. There is no call out fee, and we will talk you through the options if there is a cheaper way to get the result you want.
Frequently Asked Questions
Do I need a licensed electrician to install lights in Adelaide?
Yes. In South Australia all fixed lighting work, including swapping fittings, adding downlights and running new circuits, must be done by a licensed electrician under the Electricity Act. We work under licence PGE 273919 and give you a certificate of compliance for every job, which protects your insurance and helps at resale.
How much does it cost to replace halogen downlights with LED?
It depends mostly on how many lights you have and whether the existing wiring can be reused. A straight swap of several halogens for LED downlights is usually a tidy half day job. We give you a fixed quote up front after a quick look, with no call out fee to get that quote.
Why do my LED downlights flicker?
The most common cause is an old dimmer built for halogen loads that cannot drive LEDs properly. Cheap or mismatched fittings and a loose connection can also do it. We fit trailing edge dimmers matched to your LEDs, or check the fitting and wiring, and the flicker almost always disappears.
Are LED downlights safe to install under ceiling insulation?
Only if they are insulation contact rated. Old halogen fittings ran hot and had to be kept clear of insulation, which is a real fire risk in older roof spaces. We fit insulation contact rated LED downlights that can sit safely under batts and remove the old transformers at the same time.
Can you install outdoor and garden lighting?
Yes. We install weather rated verandah, pergola, deck and alfresco lights, plus garden and path lighting and sensor security lights. We choose fittings that stand up to Adelaide summers and coastal salt air, and we can add a weatherproof outdoor point if the area does not have power to it yet.
What colour temperature should I choose for my lights?
Warm white around 3000K suits bedrooms, living rooms and dining areas because it feels relaxed. Cooler, brighter light works better in kitchens, bathrooms, laundries, garages and workshops where you need to see clearly. We help you match the colour to each room so the whole house feels right rather than mixed.
Will switching to LED lighting really save money?
Yes, and the saving is meaningful. LED fittings draw a fraction of the power of halogens and last far longer, so you spend less on running costs and replace globes much less often. In a home full of old halogens the drop in lighting power use is significant, and we can estimate it before you commit.
Can you plan a lighting layout for a whole room or house?
Absolutely. We look at how each space is used, where light is actually needed, and how to layer general, task and feature lighting on sensible switching. Good planning avoids dark corners and glare, and gets the number and spacing of fittings right the first time rather than adding more later.
Do I need to replace my switchboard to add more lighting?
Not always. If your board has spare capacity and the wiring is sound, we can add lighting without touching it. If the board is old, full or lacks safety switches, we will tell you and quote the upgrade separately so you can decide. We never add load that a board cannot handle safely.
How long does a lighting installation take?
A simple downlight swap of a few fittings is often done in a few hours. A full room of new downlights, pendants and a dimmer takes most of a day, and a renovation with new circuits can run longer. We give you a realistic timeframe with your fixed quote so there are no surprises.
Can you fix or replace faulty lights in an emergency?
Yes. Flickering lights, a dead lighting circuit or scorched fittings can point to a wiring fault that needs attention quickly. Our team handles urgent lighting faults as part of our Adelaide electrical service. See our emergency electrician page at samedaytrades.com.au/adelaide/electrician/emergency for after hours help.
Can you install my own light fittings?
Yes. If you have bought pendants, downlights or a chandelier you love, we are happy to install them for you. We can also supply quality fittings ourselves if you would rather we sorted the lot. Either way, we check the fitting is suitable and wire it to AS/NZS 3000.
Talk to a Licensed Adelaide Electrician Today
No call out fee. Fixed quote before we start. Lifetime warranty on labour. Call now or book online.
