Lighting Installation Perth
Perth's Lighting Installation Specialists
Good lighting changes how a room feels and how much you pay to run it. Our licensed Perth electricians upgrade tired halogens to efficient LEDs, replace failed fittings, and wire in outdoor, sensor and feature lights that suit the way you actually live.
Every job is done to standard by a qualified electrician, tested on completion, and priced upfront. Whether you want one flickering downlight fixed or a full lighting refresh, we turn up on time and leave the space clean.
Brighter, More Efficient Lighting
Old halogen downlights burn hot, cost a fortune to run, and fade fast. If your rooms feel dim, patchy or uneven, or fittings keep failing and flickering, upgrading the lighting makes an immediate difference. Modern LEDs draw a fraction of the power, last far longer, and throw clean, consistent light exactly where you want it.
We assess your existing setup, point out what is dragging up your power bill, and recommend fittings that match each room. The result is brighter, cooler and cheaper lighting that lifts the whole home and stops you replacing dead globes every few months.
Our Lighting Services
We install, upgrade and repair lighting across Perth:
LED Downlight Upgrades
Swapping old halogen downlights for LEDs is one of the fastest ways to cut a power bill and brighten a room. Halogens run hot, waste most of their energy as heat, and burn out often. Our licensed Perth electricians remove the old fittings, check the wiring and any transformers, and install sealed LED downlights rated for the space. Where the ceiling holds insulation, we fit IC-rated downlights that sit safely against it.
We match the colour temperature to the room, warm white around 3000K for living and sleeping areas and cool white near 4000K for kitchens and bathrooms, then set the spacing so light lands evenly with no dark spots or glare. Every fitting is tested before we leave. You get cooler, cleaner light, fewer replacements, and LEDs that use up to 80 per cent less power than the halogens they replace.
Replacing Old Light Fittings
Fittings age, corrode and fail, and old wiring behind them can become a hazard. We replace worn ceiling lights, batten holders, oyster fittings and wall lights with modern, efficient units that suit the room. If a light has stopped working, buzzes, or trips the circuit, we find the fault first rather than just swapping the fitting.
That means checking connections, switches and the cable behind the wall. Our licensed Perth electricians handle single fittings or a whole home refresh, dispose of the old units, and make sure everything is mounted securely and wired to standard so it lasts.
Outdoor and Security Lighting
Well placed outdoor lighting makes a property safer and easier to use after dark. We install floodlights, wall lights, garden and path lighting, and entry lights across patios, driveways, carports and alfresco areas. All outdoor fittings are weather rated and wired to handle the elements. For security we fit motion sensor lights that switch on when someone approaches and settings you can adjust for timing and sensitivity.
Our licensed Perth electricians position each fitting so it covers the right zones without glare into windows or over the fence, then test the sensors and coverage before handing it back to you.
Sensor Lights, Dimmers and Switches
The right controls make lighting easier to live with and cheaper to run. We install motion sensors that trigger lights in hallways, garages and outdoor areas, and dimmers that let you set the mood and lower power use in living rooms and bedrooms. We also replace old, cracked or faulty switches with clean, modern plates, and can group switching so one plate controls a room properly.
If a light flickers when dimmed or a switch feels warm, we fix it. Our licensed Perth electricians fit LED-rated trailing edge dimmers matched to your fittings, so you get smooth, flicker free control instead of the buzz an old halogen dimmer causes.
Why Choose Same Day Trades for Lighting Installation in Perth?
People across Perth call us back for lighting work because the job is done properly the first time, priced upfront, and finished cleanly. Here is what you get:
- Fully licensed and insured electricians on every job, with all work tested on completion.
- Upfront pricing agreed before we start, and no call out fee.
- Honest advice on which fittings actually save power and suit each room.
- Clean, tidy work with old fittings removed and the space left as we found it.
- Workmanship guaranteed, with every fitting installed to Australian wiring standards.
- On time arrival and clear communication from the first call to the final test.
Getting the Right Lighting for Each Room
Good lighting is planned, not guessed. Kitchens and workspaces need bright, even task light, while bedrooms and lounges suit softer, layered light you can dim. As a rough guide we allow one downlight for every 1.5 to 2 square metres, so a bedroom takes four to six and an open living area eight to twelve. We map the layout first so fittings land where they earn their place.
We match colour temperature to the room. Warm white around 3000K feels cosy in living and sleeping areas, while cool white near 4000K gives crisp, clear light in kitchens, bathrooms and laundries. Layering task, ambient and feature lighting lets one room do several jobs without glare or dark corners. Switching to LED across the home cuts running costs sharply and the fittings last far longer, so you replace fewer globes and pay less to keep the lights on.
IC-Rated Downlights and Ceiling Insulation Safety
Most Perth homes built since the 1990s have ceiling insulation, and that changes how downlights must be installed. Old halogen fittings run at 200 to 300 degrees and cannot sit near insulation, so the batts get cut back around them, which leaves gaps and wastes energy. That heat is also a genuine fire risk when insulation creeps too close. It is one of the main reasons to move off halogen for good.
We install IC-rated LED downlights built to sit safely in direct contact with insulation, so the batts stay intact and the ceiling keeps its full thermal cover. Our licensed Perth electricians check what insulation you have, choose fittings rated for it, and space them correctly. You end up with a safer ceiling, no cold gaps around the lights, and downlights that meet Australian wiring standards.
Switching from Halogen to LED Downlights
If your ceilings are still full of halogen downlights, upgrading to LED is the single biggest lighting win in most homes. Halogens are being phased out, run at high heat, and waste most of their energy as warmth rather than light, so you get constant globe changes and a power bill that never drops. LED downlights use up to 80 per cent less power for the same or better brightness, run cool, and last far longer between replacements.
Our licensed Perth electricians remove the old fittings, disconnect redundant halogen transformers, and fit LED drivers where a dimmable circuit needs one, which stops the under loading that makes cheap swaps flicker. We check the wiring, install sealed IC-rated LEDs sized for each room, and match the colour temperature so the light suits the space. Most homes notice a brighter, cleaner feel straight away and a clear drop in running costs.
Smart, Commercial and Emergency Lighting
Lighting is not only about downlights. We wire smart lighting you control from a phone or a wall panel, with app control, timers and automation so lights come on at dusk, switch off when a room empties, or set a scene for movie night. On the commercial side, our licensed Perth electricians handle office and retail fit outs, shop and display lighting, and high bay lighting for warehouses and workshops, all built around even light levels and lower running costs.
We also install and test emergency and exit lighting so a workplace meets its safety obligations, and we plan lighting for renovations and new builds from the ground up rather than working around what is already there. Whether it is a single smart dimmer at home or a full office upgrade, we design the layout, install to Australian wiring standards, and test every fitting before we finish.
Lighting Installation Across All Perth Suburbs
Our electricians cover lighting installation, upgrades and repairs right across the metro area, from the northern suburbs and the coast through to the eastern and southern suburbs and the hills. Wherever you are, you get the same licensed team, upfront pricing and clean finish. Book a downlight upgrade, an outdoor lighting fit out, or a quick repair and we will come to you.
Book Lighting Installation in Perth
Ready to brighten your home or cut your power bill? Call our team on 1300 632 094 for upfront pricing on LED upgrades, outdoor and sensor lighting, dimmers, switches and repairs. We book a time that suits you, turn up on schedule, and test everything before we leave. To see the full range of work our Perth electrician team handles, ask when you call and we will point you in the right direction.
Frequently Asked Questions : Lighting Installation Perth
What Our Customers Say?
Same Day Trades
Perth, Australia
Also servicing the surrounding area
Opening Hours
Monday : OPEN 24 Hours
Tuesday : OPEN 24 Hours
Wednesday : OPEN 24 Hours
Thursday : OPEN 24 Hours
Friday : OPEN 24 Hours
Saturday : OPEN 24 Hours
Sunday : OPEN 24 Hours
Why Choose Us?
Same Day Trades Perth Electrical Services
Trusted Tradesmen
1,800+ verified Google reviews.
Transparent Pricing
We make sure you know exactly what you are paying for ahead of time.
Licensed And Insured
You’re in safe hands as our tradesmen are fully licensed and insured to do your job.
Workmanship Guarantee
Our work will be free of defects in workmanship and workmanship will be warranted for life.
Convenient Bookings
We offer convenient booking times that can be worked around your schedule.
Available All Hours
We take calls 24 hours a day and 365 days a year so that we’re always available to be of service.
Trusted Tradesmen
With hundreds of 5 star reviews, we’re the local tradesmen you can trust.
Transparent Pricing
We make sure you know exactly what you are paying for ahead of time.
Licensed And Insured
You’re in safe hands as our tradesmen are fully licensed and insured to do your job.
Workmanship Guarantee
Our work will be free of defects in workmanship and workmanship will be warranted for life.
Convenient Bookings
We offer convenient booking times that can be worked around your schedule.
Available All Hours
We take calls 24 hours a day and 365 days a year so that we’re always available to be of service.