Blocked Basin
Read More »
If your bathroom or kitchen sink drains slower than usual, the problem might be more than just a few tufts of hair and food particles.
Install Dual Mixer Tap
G★★★★★
4.6 · 2,000+ Google reviews
4.6 · 2,000+ Google reviews
A single-lever mixer tap blends hot and cold and controls flow with one hand, making it more convenient and easier to use and clean than separate hot and cold taps, which is why mixers are standard in modern kitchens and bathrooms. Our licensed plumbers install mixer taps in kitchens, basins, baths and showers, upgrade separate taps to mixers (handling any plumbing changes), and fit them leak-free with correct, sealed connections. We can supply quality mixers or install ones you have chosen, and repair dripping or stiff mixers too. We install mixer taps across Brisbane, Perth and Adelaide, with same-day service where we can and an upfront fixed price.
Why choose Same Day Trades for mixer taps
We are local, licensed and insured plumbers who do this work every day, so we get it right the first time, with no mess and no surprises on the invoice.
- Fully licensed and insured plumbers
- Upfront fixed pricing before we start
- Same-day service where we can, with 24/7 phones
- Workmanship guaranteed and the job left clean
- Servicing Brisbane, Perth and Adelaide
Whatever the job, you get honest advice and a tidy, professional result.
What a mixer tap is
A mixer tap blends hot and cold water together and controls both the temperature and the flow with a single lever or handle, so you can set exactly the temperature and flow you want with one hand. This is in contrast to traditional separate hot and cold taps, where you adjust two taps to find the right temperature. Mixer taps are now the standard in modern kitchens and bathrooms because they are convenient, easy to use, and give precise, one-hand control. We install mixer taps in kitchens, basins, baths and showers, connect them properly, and test them leak-free, across Brisbane, Perth and Adelaide, whether you are fitting new or upgrading from separate taps.
The benefits of a mixer tap
Mixer taps offer several advantages over separate taps:
- One-hand control of temperature and flow, convenient when your hands are full or dirty
- Precise temperature setting, easy to get the water just right
- Easier to clean around, with one tap body instead of two
- A modern, streamlined look
- Water and energy saving, less water run while adjusting two taps to temperature
- A wide range of styles to suit any kitchen or bathroom
These benefits are why mixers are the standard choice in modern homes, and why upgrading from separate taps is a popular, worthwhile improvement.
Upgrading from separate taps
A popular job is replacing traditional separate hot and cold taps with a single-lever mixer, which modernises the look and makes the tap much easier to use. Switching from two taps to a mixer involves some plumbing change, because a mixer connects differently, the hot and cold supplies feed into one tap body rather than two separate taps, so the connections may need adapting. For a basin or sink with two tap holes, a mixer may need a special base or the holes adapting. It is a straightforward job for a plumber, and we handle the changes needed. We will explain and quote what is involved for your particular setup, so you can upgrade to the convenience of a mixer.
Kitchen mixer taps
The kitchen is where a mixer tap is most appreciated, as you constantly adjust the water for washing, rinsing and filling, and one-hand control is a real convenience, especially with messy hands. We install kitchen mixers in a range of styles, including pull-out and pull-down mixers with a handy spray hose for rinsing and filling pots, and tall goose-neck mixers with extra clearance for large pots and pans. We connect the mixer to the water supply, seal it to the sink or bench, and test it leak-free. Whether you are fitting a new kitchen, upgrading from separate taps, or replacing a worn mixer, we install a kitchen mixer that suits how you use your kitchen.
Bathroom mixer taps
Mixer taps are just as popular in the bathroom, on basins, baths and showers, for their easy one-hand temperature control and clean, modern look. We install basin mixers, bath mixers and spouts, and shower mixers, connecting them properly and sealing them to the basin, bath or wall, and testing them leak-free. We can match the tapware across a bathroom for a consistent look, and advise on styles and finishes, from chrome to matte black and brushed nickel. Whether you are renovating a bathroom, updating a vanity, or upgrading tired separate taps to mixers, we install bathroom mixer taps that look the part and give you convenient, precise control of your water.
How mixer taps work
Inside a mixer tap is a ceramic disc cartridge, two precisely machined ceramic discs that slide over each other as you move the lever, controlling how much hot and cold water passes through and blends. This is what gives the smooth, precise, one-hand control, and it is more durable than the rubber washers in traditional taps. When a mixer eventually drips or becomes stiff, it is usually this cartridge that has worn, and replacing it restores smooth, leak-free operation, a straightforward repair. Understanding that the cartridge is the heart of a mixer helps explain both why mixers work so well and how they are repaired when they eventually develop a fault, which we can do.
We supply or fit your mixer
We are flexible about the mixer tap itself. If you have chosen and bought a mixer you love, we will install it for you. If you would prefer we supply it, we can recommend a quality, reliable mixer to suit your kitchen or bathroom and your budget, and quote supply and install together as one simple job. Choosing a quality mixer matters, cheap mixers can develop cartridge and sealing problems sooner, so investing in a good one pays off in longevity and smooth operation. Whichever way you prefer, we fit your mixer correctly, leak-free, with a tidy finish, so you get a tap that looks good and works smoothly for years.
Water pressure and mixer taps
Mixer taps work best within a suitable water pressure range, and both very high and very low pressure can affect them. Excessively high pressure stresses the cartridge and seals and can cause dripping and water hammer, while very low pressure can mean a weak flow, and some mixers need a minimum pressure to perform well. When installing a mixer, we can check your water pressure and, if it is too high, fit a pressure-limiting valve to protect the tap and your whole plumbing system. If pressure is an issue, we will advise on the right approach, so your new mixer performs well and lasts, rather than developing problems from unsuitable pressure.
Fixing a dripping or stiff mixer
If you already have a mixer tap that drips, is stiff or hard to turn, or leaks around the base, the cause is almost always a worn ceramic cartridge, or sometimes a worn O-ring. These wear over time or if grit gets into the cartridge, and replacing the cartridge restores the smooth, leak-free operation. It is a straightforward, affordable repair that is far cheaper than a new mixer. We carry common cartridges and can identify the right one for your mixer. So whether you want a new mixer installed, or your existing mixer repaired, we can help, fixing a dripping or stiff mixer by replacing the worn cartridge and restoring it to good as new.
Mixer taps in a renovation
Installing mixer taps is a common part of a kitchen or bathroom renovation, and doing it alongside the other work is efficient. New mixers instantly modernise a space, and if you are fitting a new sink, basin, bath or vanity, new matching mixer tapware completes the result. We coordinate the mixer installation with the other plumbing work, so it is all done together and the plumbing is set up to suit. Whether you are doing a full renovation or just refreshing a tired kitchen or bathroom by upgrading to mixers, we install mixer taps that suit the new look and give you convenient, precise control of your water for years to come.
How much does it cost?
The cost of installing a mixer tap depends on the mixer, whether you supply it or we do, and the plumbing involved, a straight replacement of an existing mixer is quicker and cheaper than upgrading from separate taps, which may need the connections or tap holes adapting. Installing several taps in one visit is more economical. We give you an upfront fixed price before we start, including supply if we are providing the mixer, so you know the cost. Investing in a quality mixer and professional installation means it works smoothly, does not leak, and lasts, rather than needing attention soon after.
Same-day plumbing service
Whether you want a new mixer tap installed, to upgrade from separate taps, or to fix a dripping or stiff mixer, we offer fast service and same-day appointments where we can across Brisbane, Perth and Adelaide. We can install mixers you have chosen or supply quality ones, fit them leak-free with a tidy finish, and carry common cartridges for repairs. Our phones are answered around the clock. We will give you an upfront price, install or repair your mixer efficiently, and make sure it works smoothly and does not leak before we leave, so you get convenient, precise, one-hand control of your kitchen or bathroom water.
Licensed, guaranteed plumbers
Installing mixer taps is best done by a licensed plumber who will fit them correctly, leak-free, adapt the connections when upgrading from separate taps, and sort any pressure issues. Our team is fully licensed and insured, we install kitchen, basin, bath and shower mixers, upgrade separate taps to mixers, repair dripping and stiff mixers, and back our work. You get honest advice on the right mixer, upfront fixed pricing, tidy work, and a smooth, leak-free tap. For a plumber near you to install a mixer tap, we cover Brisbane, Perth and Adelaide.
Mixer tap FAQs
What is a dual mixer tap?
A mixer tap blends hot and cold water and controls flow with a single lever or handle, giving easy one-hand temperature and flow control, instead of separate hot and cold taps.
Can you replace my separate taps with a mixer?
Yes. We can replace separate hot and cold taps with a modern single-lever mixer, which may involve some plumbing changes we will explain and quote.
Can you supply the mixer tap?
Yes. We can install a mixer you have chosen or recommend and supply a quality one to suit your kitchen or bathroom.
Why choose a mixer tap?
Mixers are convenient, easy to use with one hand, easy to clean around, and give precise temperature and flow control, which is why they are standard in modern kitchens and bathrooms.
Can you install mixers in the bathroom too?
Yes. We install basin, bath and shower mixers, as well as kitchen mixers, all connected and tested leak-free.
How much does it cost?
It depends on the mixer and any plumbing changes to switch from separate taps. We give you an upfront fixed price before we start.
Why is my mixer tap dripping or stiff?
A dripping or stiff mixer usually has a worn ceramic cartridge, which we can replace to restore smooth, leak-free operation.
Do you service my area?
Yes, we install mixer taps across Brisbane, Perth and Adelaide, with same-day service where we can.
Blocked Bath
Read More »
A hot bath is always refreshing, But sometimes when blockages occur, the situation is a lot worse than what meets the eyes, and your blocked
Blocked Downpipes
Read More »
Leaves, plants, twigs, pine needles, and roofing cement are common causes of blocked downpipes. And if not cleared in time, this will eventually lead to
Blocked Kitchen Sink
Read More »
Blocked Kitchen Sink Grease, food debris, and soap residue often build up in kitchen pipes and lead to blocked kitchen drains. Getting rid of these
Blocked Internal Drain
Read More »
Blocked drains in your house are a nuisance you are better off without. Grease, fat, oil, hair and even wipes stick to your pipe walls
Blocked Laundry
Read More »
If there is anything more taxing than doing laundry, it is dealing with a blocked laundry drain. Over time, gunk and debris build-up can lead
Blocked Stormwater
Read More »
If you are facing issues with a blocked stormwater drain, our experts at Same Day Trades are here to help you through this dilemma. We
Blocked Shower
Read More »
A blocked drain will always hinder your perfect shower experience. Well, it’s time to get rid of that problem, and you’ve come to the right
What our customers say?
Why choose us?
Trusted Tradesmen
With hundreds of 5 star reviews, we’re the local tradesmen you can trust.
Transparent Pricing
We make sure you know exactly what you are paying for ahead of time.
Licensed And Insured
You’re in safe hands as our tradesmen are fully licensed and insured to do your job.
Workmanship Guarantee
Our work will be free of defects in workmanship and workmanship will be warranted for life.
Convenient Bookings
We offer convenient booking times that can be worked around your schedule.
Available All Hours
We take calls 24 hours a day and 365 days a year so that we’re always available to be of service.
Trusted Tradesmen
With hundreds of 5 star reviews, we’re the local tradesmen you can trust.
Transparent Pricing
We make sure you know exactly what you are paying for ahead of time.
Licensed And Insured
You’re in safe hands as our tradesmen are fully licensed and insured to do your job.
Workmanship Guarantee
Our work will be free of defects in workmanship and workmanship will be warranted for life.
Convenient Bookings
We offer convenient booking times that can be worked around your schedule.
Available All Hours
We take calls 24 hours a day and 365 days a year so that we’re always available to be of service.