Blocked Basin
Read More »
If your bathroom or kitchen sink drains slower than usual, the problem might be more than just a few tufts of hair and food particles.
Install Gas Stove
G★★★★★
4.6 · 2,000+ Google reviews
4.6 · 2,000+ Google reviews
Connecting a gas stove or upright cooker is licensed gas fitting that must be done safely and only by a licensed gas fitter, because gas is dangerous if connected incorrectly. Our licensed gas fitters install and connect gas stoves, run a gas point where there is none, safely disconnect and replace old stoves, test for leaks, and provide a gas compliance certificate, your proof the work is safe and legal, and coordinate the electrical side for dual-fuel models. We install gas stoves across Brisbane, Perth and Adelaide, with same-day service where we can and an upfront fixed price.
Why choose Same Day Trades for gas stoves
We are local, licensed and insured plumbers who do this work every day, so we get it right the first time, with no mess and no surprises on the invoice.
- Fully licensed and insured plumbers
- Upfront fixed pricing before we start
- Same-day service where we can, with 24/7 phones
- Workmanship guaranteed and the job left clean
- Servicing Brisbane, Perth and Adelaide
Whatever the job, you get honest advice and a tidy, professional result.
Professional gas stove installation
Installing a gas stove or upright cooker involves connecting it to your gas supply, which by law must be done by a licensed gas fitter, because an incorrect gas connection is dangerous, risking leaks, fire or carbon monoxide. A proper installation connects the stove safely to the gas point, tests it for leaks, and comes with a gas compliance certificate proving it is safe and legal. We install and connect gas stoves and upright cookers, run a gas point where there is none, safely replace old stoves, and arrange any electrical connection needed for ignition. Our gas fitters are fully licensed, so your gas stove is installed safely and compliantly. We install gas stoves across Brisbane, Perth and Adelaide, with an upfront fixed price.
Why only a licensed gas fitter
Connecting a gas stove is not a DIY or handyman job, by law it must be carried out by a licensed gas fitter, and for very good reason: a mistake can cause a gas leak, a fire or an explosion, or produce carbon monoxide. Unlicensed gas work is illegal, extremely dangerous, and voids your insurance and appliance warranty. A licensed gas fitter has the training, equipment and legal authority to connect the stove safely, test it for leaks, and issue the compliance certificate that proves it meets the standard. Our gas fitters are fully licensed, so when we install your gas stove, it is done safely, legally and with proper certification, exactly as the law and your safety require.
Installing a gas point
To connect a gas stove, there needs to be a gas point (a gas outlet with an isolating valve) at the stove location, and if there is not one, we can install it. This involves running a gas line from your existing gas supply to the stove position and fitting a compliant gas point, all done by our licensed gas fitters. Installing a gas point is common when adding a gas stove to a kitchen that did not have one, converting from electric, or relocating the stove in a renovation. We run and install the gas point safely and to the standard, so your new gas stove has a proper, compliant connection point, and we test the whole installation on completion.
Replacing a gas stove
Replacing an old gas stove or upright cooker with a new one is a common job, and because the gas point is already there, it is usually straightforward, though it still must be done by a licensed gas fitter. We safely disconnect the old stove, connect the new one to the gas point, test the connection for leaks, and provide a compliance certificate, checking the gas point and connection suit the new stove. We can also take the old stove away. Whether you are upgrading to a better model or replacing a faulty stove, we handle the gas connection safely and compliantly, so your new gas stove is connected properly and ready to use.
The gas compliance certificate
When we install or connect a gas stove, we provide a gas compliance certificate, your documented proof that the work was carried out by a licensed gas fitter and meets the relevant Australian Standard. This certificate matters: it keeps your appliance warranty and home insurance valid, it is your record that the gas work is safe and legal, and it is often required when selling or renting a property. Because our gas fitters are fully licensed, every gas stove installation we do comes with the correct certification. You get not just a connected stove, but the assurance and paperwork that it was done safely and properly, which is an important part of a compliant gas installation.
Leak testing
A crucial part of installing a gas stove is testing the connection for leaks before the job is complete, because even a small gas leak is dangerous. After connecting the stove, our gas fitters test the connection and the gas system to confirm there are no leaks and that it holds pressure correctly, using proper testing methods and equipment. We never leave a gas connection without testing it. This leak testing, along with the correct connection and the compliance certificate, is what makes a professional gas stove installation safe, and it is a key reason gas work must be done by a licensed professional. It is standard on every gas installation we carry out, so you can use your stove with confidence.
Dual-fuel stoves
Many upright cookers are dual-fuel, combining a gas cooktop with an electric oven, which gives the responsive flame of gas for cooking and the even heat of an electric oven for baking. A dual-fuel stove needs both a licensed gas fitter for the gas cooktop connection and a licensed electrician for the electric oven, which usually needs its own circuit. We can handle and coordinate both, the gas connection and the electrical connection, so your dual-fuel stove is connected correctly and safely on both sides, with the gas work certified. We make sure whatever type of stove you have, gas, dual-fuel, or fully electric, is connected properly by the right licensed tradespeople.
Gas vs electric stoves
If you are choosing between gas and electric, it helps to know the installation difference. A gas stove needs a licensed gas fitter and a gas point, and gives the instant, responsive, visible flame many cooks prefer. An electric stove needs a licensed electrician and usually a dedicated circuit. We install gas stoves, and can also install electric stoves through our electricians. If you are switching between fuel types, for example electric to gas, there is extra work to run the gas point (and cap the electrical supply), which we coordinate. Whichever type you choose, we make sure it is connected correctly and safely by the appropriate licensed tradesperson.
Converting from electric to gas
If you prefer cooking with gas and are switching from an electric stove, we can handle the conversion, which involves running a gas point to the stove location (if there is not one) and safely dealing with the electrical supply the old stove used. Many cooks prefer gas for its instant, controllable flame, and converting to a gas stove is a popular upgrade where gas is available. Our licensed gas fitters run and install the gas point and connect the new gas stove safely, test it, and provide a compliance certificate, and our electricians safely deal with the redundant electrical connection. We handle the whole conversion, so you can switch to cooking with gas safely and compliantly.
Gas safety
Gas is a safe, efficient fuel when installed and maintained correctly, but it demands respect, which is why gas work is licensed and why we test every installation for leaks. A correctly installed gas stove burns with a crisp blue flame; a yellow or orange flame can indicate incomplete combustion and a carbon monoxide risk, which we check for. We can also check your other gas appliances and connections for safety while we are there, and advise on carbon monoxide alarms. Gas safety is central to everything we do, so as well as installing your stove safely and compliantly, we help ensure your whole gas setup is safe, giving you peace of mind as well as a working stove.
How much does it cost?
The cost of installing a gas stove depends on whether a gas point already exists or one needs to be run and installed, whether it is a replacement or a new installation or conversion, and any electrical work needed for a dual-fuel model. A straightforward replacement using an existing gas point is quicker and cheaper than running a new gas line and point, or converting from electric. We give you an upfront fixed price before we start, including the connection, leak testing and compliance certificate, so you know the cost. If a gas point needs installing or you are converting fuel types, we will explain what is involved, so there are no surprises.
Same-day gas service
Whether you have a new gas stove to install, an old one to replace, or need a gas point run for one, we offer fast service and same-day appointments where we can across Brisbane, Perth and Adelaide. Our licensed gas fitters will connect the stove safely, run a gas point if needed, arrange any electrical connection, test for leaks, and provide a compliance certificate, with an upfront price. Our phones are answered around the clock. We make sure your gas stove is installed safely, compliantly and certified, so you can cook with confidence, and we handle the whole job from gas point to leak test.
Licensed, certified gas fitters
Installing a gas stove is licensed gas fitting that must be done safely and only by a licensed gas fitter, with the connection tested for leaks and a compliance certificate issued, it is never a DIY job. Our fully licensed gas fitters install and connect gas stoves and upright cookers to the Australian Standard, run gas points, safely replace old stoves, handle dual-fuel and conversions, test for leaks, and provide the compliance certificate. You get a safe, compliant, certified installation, honest advice on gas safety, upfront fixed pricing and guaranteed workmanship. For gas stove installation, we cover Brisbane, Perth and Adelaide.
Gas stove FAQs
Do I need a licensed gas fitter to install a gas stove?
Yes. By law, connecting a gas stove or upright cooker must be done by a licensed gas fitter. Our gas fitters install it safely and provide a compliance certificate.
Can you replace my old gas stove?
Yes. We safely disconnect the old gas stove and connect the new one, test for leaks, and provide a compliance certificate.
Do you provide a gas compliance certificate?
Yes. After installing a gas stove we test the connection and provide a gas compliance certificate, your proof it is safe and legal.
Can you install a gas point for a new stove?
Yes. If there is no gas point at the stove location, we can run and install one as part of the job.
What about dual-fuel stoves?
Dual-fuel stoves (gas cooktop, electric oven) need both a licensed gas fitter and an electrician. We can handle and coordinate both.
How much does it cost?
It depends on whether a gas point exists and the connection needed. We give you an upfront fixed price before we start.
Is a gas stove safe?
Yes, when installed by a licensed gas fitter and tested for leaks. We ensure a safe, compliant installation with a certificate.
Do you service my area?
Yes, our licensed gas fitters install gas stoves across Brisbane, Perth and Adelaide, with same-day service where we can.
Blocked Bath
Read More »
A hot bath is always refreshing, But sometimes when blockages occur, the situation is a lot worse than what meets the eyes, and your blocked
Blocked Downpipes
Read More »
Leaves, plants, twigs, pine needles, and roofing cement are common causes of blocked downpipes. And if not cleared in time, this will eventually lead to
Blocked Kitchen Sink
Read More »
Blocked Kitchen Sink Grease, food debris, and soap residue often build up in kitchen pipes and lead to blocked kitchen drains. Getting rid of these
Blocked Internal Drain
Read More »
Blocked drains in your house are a nuisance you are better off without. Grease, fat, oil, hair and even wipes stick to your pipe walls
Blocked Laundry
Read More »
If there is anything more taxing than doing laundry, it is dealing with a blocked laundry drain. Over time, gunk and debris build-up can lead
Blocked Stormwater
Read More »
If you are facing issues with a blocked stormwater drain, our experts at Same Day Trades are here to help you through this dilemma. We
Blocked Shower
Read More »
A blocked drain will always hinder your perfect shower experience. Well, it’s time to get rid of that problem, and you’ve come to the right
What our customers say?
Why choose us?
Trusted Tradesmen
With hundreds of 5 star reviews, we’re the local tradesmen you can trust.
Transparent Pricing
We make sure you know exactly what you are paying for ahead of time.
Licensed And Insured
You’re in safe hands as our tradesmen are fully licensed and insured to do your job.
Workmanship Guarantee
Our work will be free of defects in workmanship and workmanship will be warranted for life.
Convenient Bookings
We offer convenient booking times that can be worked around your schedule.
Available All Hours
We take calls 24 hours a day and 365 days a year so that we’re always available to be of service.
Trusted Tradesmen
With hundreds of 5 star reviews, we’re the local tradesmen you can trust.
Transparent Pricing
We make sure you know exactly what you are paying for ahead of time.
Licensed And Insured
You’re in safe hands as our tradesmen are fully licensed and insured to do your job.
Workmanship Guarantee
Our work will be free of defects in workmanship and workmanship will be warranted for life.
Convenient Bookings
We offer convenient booking times that can be worked around your schedule.
Available All Hours
We take calls 24 hours a day and 365 days a year so that we’re always available to be of service.