Blocked Stormwater
Read More »
If you are facing issues with a blocked stormwater drain, our experts at Same Day Trades are here to help you through this dilemma. We
Install Oven
G★★★★★
4.6 · 2,000+ Google reviews
4.6 · 2,000+ Google reviews
Connecting a wall oven is licensed electrical work, because larger ovens often need a dedicated circuit of the correct rating to run safely. Our licensed electricians install and connect wall ovens, electric cooktops and range hoods, check your circuit and switchboard can supply the appliance, and add a dedicated circuit where needed. We disconnect and remove your old oven, connect the new one safely and tidily, and test it, all to the AS/NZS 3000 standard. We install ovens across Brisbane, Perth and Adelaide, with same-day service where we can and an upfront fixed price.
Why choose Same Day Trades for oven installation
We are local, licensed electricians who do this work every day, so we get it right the first time, with no mess and no shortcuts on safety.
- Fully licensed electricians, all work to AS/NZS 3000
- Upfront fixed pricing before we start
- Safety switches and a compliance certificate where required
- Same-day help for urgent faults
- Servicing Brisbane, Perth and Adelaide, phones answered around the clock
You get safe, tidy, guaranteed workmanship every time, and honest advice on what your home actually needs.
Professional oven installation
Installing a wall oven involves connecting it to your electrical supply safely, and because many ovens draw a lot of power, this is licensed electrical work that should be done by a licensed electrician, not a delivery driver or handyman. A proper installation ensures the oven is connected to a suitable circuit of the correct rating, wired safely, and tested, which keeps it working reliably and safely and protects your warranty. We install and connect built-in wall ovens, disconnect and remove old ones, and check your circuit and switchboard can supply the appliance. We install ovens across Brisbane, Perth and Adelaide, to the AS/NZS 3000 standard, with an upfront fixed price.
Hardwired vs plug-in ovens
Ovens connect to the power in one of two ways, depending on their power draw. Larger wall ovens, and most ovens combined with a cooktop on one circuit, are usually hardwired directly to a dedicated circuit, because they draw too much current for a standard plug. Smaller ovens may be plug-in, connecting to a dedicated outlet. Using the right connection for the appliance is important for safety, a high-draw oven on an inadequate circuit or a standard outlet is a fire risk. We determine the correct connection for your oven, check the circuit is suitable, and connect it properly, so it runs safely within the capacity of its supply.
Does my oven need its own circuit?
Many ovens, particularly larger wall ovens and oven-plus-cooktop combinations, require a dedicated circuit of the correct rating to run safely, because they draw a lot of current, more than a shared circuit or a standard power point can handle. Running a high-draw oven on an inadequate circuit causes nuisance tripping and overheating and is a fire risk. We check whether your oven needs a dedicated circuit and whether a suitable one already exists; if not, we install one of the correct rating from your switchboard. Getting the circuit right is essential for the oven to work reliably and safely, and it is a key part of a proper installation.
Replacing an old oven
Replacing an old oven with a new one is a common job, and usually straightforward because the circuit and connection are already there, though we always check they suit the new appliance. We disconnect and safely remove the old oven, connect the new one, and test it. If the new oven draws more power than the old one, or the existing circuit or connection is not up to standard, we will let you know and upgrade it as needed. We can also take away the old oven. Whether you are upgrading to a better model or replacing a failed oven, we handle the electrical connection so your new oven is ready to use safely.
Ovens, cooktops and range hoods
A kitchen often has an oven, a cooktop and a range hood that all need connecting, and we can install and connect all three. Electric cooktops, like ovens, often draw significant power and may need their own dedicated circuit, while range hoods are lighter loads. We ensure each appliance has the correct circuit and connection, and that the switchboard can handle the combined load. Installing them together as one job is efficient and ensures everything is correctly supplied. Note that gas cooktops and stoves require a licensed gas fitter for the gas connection, which we can also arrange. We make sure your whole kitchen cooking setup is connected safely and correctly.
Checking your circuit and switchboard
Before connecting a new oven, we check that your circuit and switchboard can safely supply it, which is an important step that a non-electrician would skip. A modern oven may draw more power than the one it replaces, and an older switchboard or an undersized circuit may not cope, leading to tripping or, worse, overheating. We verify the circuit rating and the switchboard capacity, and if an upgrade or a new dedicated circuit is needed, we will let you know and quote it. This ensures your new oven runs safely within its supply, rather than overloading a circuit that was never designed for it, which protects your home and the appliance.
Safe, compliant connection
Connecting an oven correctly is about more than making it work, it is about doing it safely and to the wiring standard. We ensure the oven is connected with the correct cable and connection method for its rating, that the circuit and protection are suitable, and that everything is secure and tested. An incorrectly connected oven, loose connections, an undersized cable, or the wrong circuit, is a fire and safety risk, which is exactly why this is licensed work. We complete every oven installation to the AS/NZS 3000 standard, so your appliance is connected safely and compliantly, and you can use it with confidence.
Oven not working? We can help
If your oven has stopped working, the cause may be electrical rather than the appliance itself, a tripped circuit, a failed connection, a faulty isolation switch, or a circuit fault. Before assuming the oven is dead, it is worth having the electrical supply and connection checked. We can diagnose whether the problem is in the wiring, the circuit or the connection, and repair it, restoring power to your oven. If the fault is within the appliance itself, we will let you know so you can arrange an appliance repair or replacement. Often an oven that seems broken simply has an electrical supply fault that we can fix.
Installing ovens in a renovation
A kitchen renovation or upgrade is a common time to install a new oven, and often the ideal moment to get the electrical side right, since the kitchen may be opened up and accessible. We can install the oven, cooktop and range hood, run any new dedicated circuits needed, and ensure the switchboard can handle the new kitchen loads, all coordinated with the renovation. Planning the electrical work at the right stage avoids rework and ensures your new appliances are properly supplied. If you are renovating your kitchen, talk to us about the oven and appliance connections early, so the circuits and connections are ready when the appliances go in.
Choosing where the oven goes
If you are installing an oven in a new position, rather than replacing one, the location needs a suitable electrical supply nearby, and the isolation switch must be accessible as required. We can advise on the electrical requirements for the oven’s position, run the circuit to it, and install the isolation switch correctly. Built-in wall ovens are typically installed in a cabinet at a convenient height, and the connection must be accessible for isolation. We make sure the electrical supply suits the chosen location and meets the requirements, so your oven is both well-placed for use and correctly and safely connected.
How much does oven installation cost?
The cost of installing an oven depends mainly on whether a suitable circuit already exists or a new dedicated circuit needs to be run, and the type of connection. A straightforward replacement using an existing suitable circuit is quicker and cheaper than installing a new circuit from the switchboard, which involves more work. Installing an oven, cooktop and range hood together is efficient when done in one visit. We assess your situation, including the circuit and switchboard, and give you an upfront fixed price before we start, so you know the cost, with no surprises if additional electrical work turns out to be needed.
Same-day electrical service
Whether you have a new oven waiting to be connected, an old one to replace, or an oven that has stopped working due to an electrical fault, we offer fast service and same-day appointments where we can across Brisbane, Perth and Adelaide. Our electrician will check the circuit and switchboard, connect your oven safely to the correct supply, and test it, or diagnose and fix an electrical fault stopping your oven working. Our phones are answered around the clock. We will give you an upfront price and make sure your oven is connected safely and ready to use, so you are not left without a working oven.
Licensed, compliant electricians
Connecting an oven is licensed electrical work, because a high-draw appliance on the wrong circuit or an incorrect connection is a fire risk, so it should never be a DIY or handyman job. Our licensed electricians install and connect wall ovens, electric cooktops and range hoods to the AS/NZS 3000 standard, check and upgrade the circuit and switchboard as needed, and test everything. You get a safe, compliant connection, honest advice on any circuit upgrade, upfront fixed pricing, tidy work and guaranteed workmanship. For oven installation and connection, along with other kitchen electrical work, we cover Brisbane, Perth and Adelaide.
Oven installation FAQs
Do I need an electrician to install an oven?
Yes. Connecting a wall oven, especially a hardwired one, is licensed electrical work and must be done by a licensed electrician for safety and compliance.
Does an oven need its own circuit?
Many ovens, particularly larger wall ovens, require a dedicated circuit of the correct rating. We check your supply and install one if needed.
Can you replace my old oven with a new one?
Yes. We disconnect and remove your old oven and connect the new one, checking the existing circuit and connection are suitable for the new appliance.
Is my oven hardwired or plug-in?
It depends on the model and its power draw. Larger ovens are often hardwired on a dedicated circuit; smaller ones may use a dedicated outlet. We confirm and connect correctly.
How much does oven installation cost?
It depends on whether a new circuit is needed and the type of connection. We give you an upfront fixed price before we start.
Can you install the oven and cooktop together?
Yes. We can connect ovens, electric cooktops and range hoods, ensuring each has the correct circuit and connection.
Will you check my circuit is adequate?
Yes. We check that your circuit and switchboard can safely supply the new oven, and advise if an upgrade or new circuit is needed.
Do you service my area?
Yes, we install and connect ovens across Brisbane, Perth and Adelaide, with same-day service where we can.
Blocked Toilet
Read More »
Blocked Toilet A blocked toilet is an absolute nightmare, especially if multiple people live in the house and there is only one bathroom. No matter what
Blocked Shower
Read More »
A blocked drain will always hinder your perfect shower experience. Well, it’s time to get rid of that problem, and you’ve come to the right
Blocked Bath
Read More »
A hot bath is always refreshing, But sometimes when blockages occur, the situation is a lot worse than what meets the eyes, and your blocked
Dripping Pipe
Read More »
Skyrocketing water bills, damaged ceilings, and visible mould & mildew are signs that you might have a dripping pipe problem. In that case, it’s better
Replace Taps
Read More »
If you notice sudden leaks or rust-riddled water, it may be time to replace taps immediately. Fortunately, you have come to the right place. Contact
Connect Dishwasher
Read More »
ishwashers have made our lives extremely easy, but we are sure that there is a lot of confusion about how to connect dishwasher. We all
Connect Washing Machine
Read More »
Buying new appliances for the house can be exciting, but installing them for the first time can be just as daunting. It goes without saying
What our customers say?
Why choose us?
Trusted Tradesmen
With hundreds of 5 star reviews, we’re the local tradesmen you can trust.
Transparent Pricing
We make sure you know exactly what you are paying for ahead of time.
Licensed And Insured
You’re in safe hands as our tradesmen are fully licensed and insured to do your job.
Workmanship Guarantee
Our work will be free of defects in workmanship and workmanship will be warranted for life.
Convenient Bookings
We offer convenient booking times that can be worked around your schedule.
Available All Hours
We take calls 24 hours a day and 365 days a year so that we’re always available to be of service.
Trusted Tradesmen
With hundreds of 5 star reviews, we’re the local tradesmen you can trust.
Transparent Pricing
We make sure you know exactly what you are paying for ahead of time.
Licensed And Insured
You’re in safe hands as our tradesmen are fully licensed and insured to do your job.
Workmanship Guarantee
Our work will be free of defects in workmanship and workmanship will be warranted for life.
Convenient Bookings
We offer convenient booking times that can be worked around your schedule.
Available All Hours
We take calls 24 hours a day and 365 days a year so that we’re always available to be of service.