Electrician Bentley
Bentley’s older homes and Curtin share houses keep our licensed Perth electricians busy, from sorting safety gear in a rental to running fresh circuits during a renovation. We take on anything from one power point to a full switchboard upgrade, quote before starting, add no call out fee, and often arrive the same day.
Book a licensed electrician in Bentley on 1300 632 094.
Same Day Trades Electricians in Bentley
Bentley keeps our team busy right through the week, from the brick and tile homes off Manning Road to the student houses and rentals clustered near Curtin University. We handle everything a local property throws up, whether it is a 1960s house being renovated, a share house that needs its safety gear sorted, or a small commercial unit around the technology park. Our sparkies arrive when they say they will, walk you through the fault in plain language, and price the job before a tool comes out.
A lot of Bentley stock was built decades ago and much of the old public housing is now being upgraded lot by lot, so tired wiring and undersized boards are things we deal with all the time here. Backed by our wider team of Perth electricians, we know how these homes were originally wired and what it takes to bring them up to standard. From tracing a fault in an older place to fitting fresh circuits during a renovation, we look after Bentley and the suburbs around it.
Electricians Serving Bentley
Sitting about seven kilometres south east of the city and split across the City of Canning and City of South Perth, Bentley holds a real mix of housing. Postwar brick and tile family homes, a big share of former public housing being renovated, and rows of student and rental accommodation feed Curtin University. Same Day Trades wires, repairs, and upgrades the lot, with vans that carry enough stock to wrap most jobs on the first visit.
Need a single outlet added in a study, downlights run through a made over lounge, or an old board pulled out and replaced? Our licensed Perth electricians take care of it. We schedule work by the day, hand you a clear price before starting, and never bill a call out fee to come and look. From a ten minute repair to a planned upgrade, the same crew stays with you from first call to final test.
When Should You Upgrade the Switchboard?
Walk into a lot of Bentley homes built in the sixties or seventies and you will still find a ceramic fuse board that predates dishwashers, reverse cycle air, and phone chargers in every room. Load a house like that with modern appliances and the board trips, warms up, or drops circuits at the worst moment. Rewireable fuses also mean whole circuits sit there with no safety switch behind them.
We strip out those old boards and fit a modern enclosure with the right circuit count, clearly marked so you know what feeds what. Our switchboard upgrades lift the board to current WA standards and put RCD protection across both power and lighting. If yours hums, gives off a hot plastic smell, or drops out whenever two heaters run at once, get it changed before it fails completely.
RCD Protection for Rentals and Homes
Under WA regulations a home needs a minimum of two RCDs guarding its power and lighting circuits, and those have to be fitted before the place is sold or rented out. That catches a lot of Bentley owners and landlords off guard, because plenty of the older houses here run on a single RCD or none at all, leaving circuits wide open to a live fault.
We check whatever safety switches are already there, swap out any that will not trip on test, and add RCDs to circuits that have none. A sound RCD kills the supply within milliseconds when current leaks to earth, and that speed is what turns a dangerous shock into a minor one. If yours keeps dropping out, treat it as a warning, and we will hunt down the real cause rather than just flicking it back on.
Power Point Additions and Repairs
Houses built for a handful of appliances now run laptops, chargers, a second fridge, and half a dozen kitchen gadgets, which is how Bentley homes end up with power boards daisy chained off every socket. Adding proper outlets through the kitchen, bedrooms, garage, and outdoor areas eases the strain on stretched circuits and clears the tangle of leads underfoot.
Our power point installation runs from standard double sockets and USB outlets to weatherproof exterior points and dedicated lines for ovens, split systems, and car chargers. Share houses near Curtin often want extra bedroom outlets so tenants stop overloading a single socket, and we sort that neatly. We chase the cabling in tidily, make good as we go, and test each outlet before packing up.
LED Downlights and Lighting Design
Tired of halogen downlights that cook the ceiling and blow every few months? Switching them for LED is one of the fastest ways to trim a Bentley power bill and take the heat load out of the roof space. LEDs sip a fraction of the power, hold their brightness for years, and suit kitchens, living zones, and hallways without constant replacing.
Our lighting installation spans downlights, pendants, garden and security lights, sensor floods, and complete room fit outs mid renovation. Landlords upgrading a rental often ask us to modernise dim, dated fittings so the place shows better and costs tenants less to run. We help you plan where lights land, set the colour temperature per room, and place switches where they make sense.
Ceiling Fan Fitting
Bentley sits inland with no sea breeze to take the edge off a Perth summer, so a well placed ceiling fan does genuine work in local bedrooms, living rooms, and patios. Get one over the bed and it moves the air, eases the load on the split system, and knocks running costs down through the hot stretch from December to March.
Our ceiling fan installation covers brand new fans, straight replacements, and fans with a built in light, wired to a wall switch or remote. We anchor the mount into the ceiling framing so there is no wobble overhead, and where no wiring exists we can run a fresh circuit for it. For alfrescos and patios we fit models rated for outdoor use so weather and dust do not chew through the motor early.
Rewiring Older and Rented Properties
Some of the older homes around Bentley still carry their original wiring, and once rubber or cloth insulation gets past its years it goes brittle, cracks, and stops doing its job. Decades of roof heat and the odd rodent only speed that along. Lights that flicker, switches that feel warm, outlets browning at the edges, and repeated trips all say the cabling in the walls is due for renewal.
Our house rewiring renews old cabling one circuit at a time or right across the home, fits current safety switches, and brings the installation up to today’s standards. We stage the work so power stays on where it can and the household is disrupted as little as possible. A full rewire is also the moment to build in the extra outlets and circuits a modern renovation or student house actually needs.
Locating Hidden Electrical Faults
A socket that has gone dead, half the lights out while the rest work, or a breaker that flips the instant you reset it all point to a fault buried somewhere in the wiring. In older Bentley homes, a common source is degraded connections in a switchboard or junction box that has worked loose over forty years of thermal cycling, which no visual check will pick up.
Our electrical fault finding traces the problem back to its origin with proper test instruments rather than trial and error, so you are only paying to fix the real fault, not to swap parts on a hunch. We work through the circuits, terminations, and fittings in order, tell you straight what has failed, and price the repair before we get on with it.
After Hours Emergency Electrician
Electrical trouble rarely lines up with office hours, and a scorched smell at the board, sparking from an outlet, or a chunk of the house going dark on a summer night needs sorting quickly. In a shared student house especially, a dead circuit at midnight is not something anyone should be poking at themselves.
Our emergency electrician service takes Bentley calls at any hour and makes things safe before anything else. We isolate the hazard, pin down the fault, and carry out a repair that holds rather than a temporary bodge. Notice a burning smell, see sparks, or lose power to part of the house? Kill the main switch and call us straight away.
Smoke Alarm Compliance for Tenancies
WA rules call for working smoke alarms in every home, and any alarm fitted these days has to be mains powered and interconnected, so that one triggering sets every alarm sounding at once. Battery only units no longer pass muster when a property changes hands, and a fair few Bentley rentals and older homes are still relying on them.
We install mains powered, interconnected photoelectric alarms in the correct spots across bedrooms, hallways, and living areas. That linking matters most overnight, when an alarm at the opposite end of the house can rouse a sleeping household with time to spare. We work out the right placement, wire each unit back to the board, and confirm they all sound together on test.
EV Charger Installation at Home
Electric cars are turning up on more Bentley driveways, and leaning on a standard ten amp socket to charge one is slow and rough on wiring that was never sized for it. A proper wall charger refills the battery far quicker and runs off its own protected circuit instead of fighting the rest of the garage for power.
We fit home chargers from the well known brands, run a dedicated circuit back to the board, and confirm the board can take the added draw first. On an older Bentley home where the board is already near its limit, we will flag an upgrade so the charger runs without nuisance trips, then site the unit to suit your driveway or carport.
Wiring for Older Homes, Rentals and Student Housing in Bentley
Bentley’s housing tells a clear story: postwar brick and tile owner homes, a large slice of former public housing now being renovated block by block, and streets of student and rental accommodation around Curtin. Each type brings its own electrical headaches, from undersized boards and unprotected circuits to years of tenant wear on outlets and fittings.
For owners we handle the upgrades a renovation calls for, and for landlords we take care of RCD and smoke alarm compliance before a lease, plus repairs and fit outs between tenancies. We match the work to the age and use of the property, whether that is a family home getting a new life or a share house needing its safety gear brought up to code, and we bill and report the way agents and property managers need.
Landlord and Owner WA Compliance
Every bit of electrical work in Western Australia has to be done by a licensed electrical worker, and there is good reason for that, since dodgy wiring is a fire and shock risk and can wipe out an insurance claim. Each job we finish satisfies the wiring rules and state requirements, and we leave it tested, tidy, and safe rather than hiding shortcuts behind a wall.
Same Day Trades is fully licensed and insured, and we hand over the compliance paperwork you need once the job is complete. For anyone selling or leasing a Bentley property, that means confirming the RCDs and smoke alarms meet the required standard first. Not sure where your place stands? We will inspect it and set out plainly what needs doing.
Why Bentley Landlords and Owners Pick Us
People here come back to us because we show up on time, price the job before we lift a tool, and never tack on a call out fee to assess the work. What we quote is what you settle, with nothing sprung on you at the end. Our licensed Perth electricians look after your home, keep the mess down, and clean up before they leave.
We know Bentley well, from the older streets off Manning Road to the rental belt around Curtin and the light commercial units near the technology park. Knowing the area means we diagnose faster and pick the right fix for how these homes were built. Whether it is one stubborn outlet or a full rewire, you are dealing with tradespeople who do it properly and back their work.
Booking a Bentley Electrician
Getting us out is easy. Call 1300 632 094, describe what is going on, and we will give you a time that suits and a solid idea of the cost. Plenty of jobs we reach the same day, and since we work by the day rather than the clock, you are not watching a meter tick while we track down the fault.
We look after Bentley and the neighbouring suburbs for the whole range, from a flickering light to a complete switchboard replacement. You get a licensed electrician, upfront pricing, no call out fee, and workmanship that meets WA standards every time. Call 1300 632 094 and we will lock in the soonest slot open.
Frequently Asked Questions
It depends on the job, the parts needed, and how long it takes, which is why we price each one individually before starting. There is no call out fee to come out and assess the work, and the figure we agree upfront is what you pay, with nothing extra added once the job is finished.
You do. Every piece of electrical work in WA must be carried out by a licensed electrical worker. Unlicensed wiring is against the law, unsafe, and can void your home insurance if it causes damage. Same Day Trades is fully licensed and insured, and we provide the compliance paperwork on every job we complete in Bentley.
Usually, yes. We run vans across Bentley and the surrounding south east suburbs, so ringing early gives you the best shot at a same day slot. Emergency work we handle at any hour. Phone 1300 632 094 and we will tell you the earliest time we can get a sparky to your street.
We cover all of Bentley across both the Canning and South Perth council areas, along with St James, Wilson, Karawara, Como, and the wider south east. Whether you are near Curtin, off Manning Road, or by the technology park, a local electrician can reach you. Give us a call to confirm we service your street.
Yes. Our emergency electricians take Bentley calls at any hour, including nights, weekends, and public holidays. If you smell burning at the board, see sparks at a socket, or lose power to part of the house, switch off at the main and call 1300 632 094. We make everything safe first, then track down and repair the fault.
Yes. WA regulations require at least two RCDs, or safety switches, protecting the power and lighting circuits in a home, fitted before it is sold or leased. Many older Bentley houses come up short, running one RCD or none. We test the ones present and add extra RCDs to any circuits left unprotected.
Yes. Besides homes, we look after rentals, strata blocks, and small commercial sites around Bentley and the technology park. For landlords and managers we sort RCD and smoke alarm compliance before a lease, plus repairs and fit outs between tenants. We can invoice and report the way agents and strata managers require, and quote every job upfront.
Every time. We look over the job, explain what it involves in plain terms, and give you a firm price before any work begins. There is no charge to come and assess it, and the quoted price is what you pay. You decide whether to proceed with the full cost sitting in front of you.
The usual run is switchboard upgrades on older houses, extra power points and LED downlights, ceiling fans for the inland summers, and fault finding when a circuit keeps tripping. Safety switch and smoke alarm compliance for rentals and student houses near Curtin also comes up regularly across local properties.
Yes. Every electrician we send out is fully licensed and insured, and all work satisfies the wiring rules and Western Australian standards. We supply compliance paperwork once the job is wrapped up, and leave the work tested, tidy, and safe. You can book knowing the person at your door is qualified for the job.
Nearby Suburbs We Also Service
Our licensed Perth electricians also cover the suburbs around Bentley, so if you are close by there is a good chance one of our team is already working nearby.
St James, East Victoria Park, Carlisle, Como, Manning, Salter Point, Waterford, Karawara.
Bentley WA 6102 Service Area
Same Day Trades services Bentley 6102 and all surrounding suburbs across Perth.