Electrician Brentwood
A tripping board, a dead socket, or a full switchboard upgrade in an ageing Brentwood home: our licensed Perth electricians handle every job from a single power point up. We set an upfront price before we start, charge no call out fee, and often reach you the same day.
Call 1300 632 094 to book a licensed electrician in Brentwood.
Same Day Trades Electricians in Brentwood
Brentwood sits in the City of Melville about 10km south of the CBD, a settled family pocket between Bull Creek and Applecross with the freeway on its edge and the Swan River not far off. Same Day Trades works these streets regularly, and most of the homes are 1960s and 70s brick and tile on solid blocks, plenty of them part way through a renovation or a rebuild. We show up when we say we will and talk you through the price before the work starts.
The common thread in Brentwood is age: original switchboards, tired circuits, and lighting that has not been touched in decades. Backed by our wider team of Perth electricians, we bring these older homes up to a standard that suits how a modern family actually lives. Whether you are extending, updating, or just fixing what has stopped working, we cover Brentwood and the neighbouring Melville suburbs.
Your Brentwood Electrical Specialists
Most of Brentwood was built in the 1960s and 70s, and those brick and tile family homes are still doing the job decades on, though the wiring inside them was never planned for the way a household runs today. Same Day Trades looks after the lot, from a quick repair to a full upgrade, and our vans carry enough stock to close out most jobs on the first visit.
Need an extra outlet in a study, downlights through a made over kitchen, or a fresh board because the old one keeps tripping? Our licensed Perth electricians handle all of it. We schedule by the day, hand you a clear price before starting, and never add a call out fee for coming to look. From first phone call to final test, the same crew sees the job through.
Time for a Switchboard Upgrade?
A lot of Brentwood homes are still running the ceramic fuse board they were built with in the 1960s or 70s, and that board was designed for a fridge, a stove, and a few lights. Load it with ducted air, a second fridge, an induction cooktop, and a car on charge, and it trips or runs warm. Rewireable fuses also skip the safety switch protection that today’s circuits are meant to have.
We pull out the old board, fit a modern enclosure with the right circuit count, and label each one so you can find it later. Our switchboard upgrades meet current WA standards and spread RCD protection across both power and lighting. If your board hums, gives off a hot smell, or drops out when the kettle and microwave run together, replace it before it lets you down.
RCD Safety Switches Fitted to Standard
Under Western Australian rules a home needs at least two RCDs guarding its power and lighting circuits, and they have to be fitted before the property is sold or handed to a tenant. A good number of original Brentwood homes carry a single RCD, or none at all, leaving whole circuits with nothing to cut the supply if a fault turns a wire live.
We test the safety switches on your board, swap out any that will not trip on demand, and add RCDs to any circuit left unguarded. When one detects current leaking to earth it kills the supply in a fraction of a second, and that speed is often what turns a dangerous shock into a harmless jolt. If a switch keeps dropping out, treat it as a real warning rather than a nuisance, and we will trace the cause instead of just flicking it back on.
More Outlets, Fewer Extension Leads
Homes wired half a century ago came with a handful of outlets, so in most Brentwood houses you find double adaptors and power boards stretched behind every bit of furniture. Adding proper points in the kitchen, bedrooms, garage, and patio eases the strain on old circuits and clears away the leads that snake across the floor.
Our power point installation takes in standard double sockets, USB outlets, weatherproof points for outside, and dedicated lines for ovens, split systems, and EV chargers. During a renovation we can rough in the outlets while walls are open, which saves patching later. Every cable is run tidily, every wall made good, and each point tested before we pack up.
Warm to Cool: LED Downlight Upgrades
Plenty of Brentwood kitchens and living rooms are still lit by old halogen downlights that throw off heat, fade with age, and blow far too often. Moving to LED is one of the fastest ways to trim a power bill and take the heat load out of the ceiling, and the newer fittings last for years across the whole house.
Our lighting installation spans downlights, pendants, garden and security lights, sensor floods, and full room fit outs when you are renovating. We help you set out where the light falls, pick a colour temperature that suits the room, and put switches where they make sense for daily life. In a mid century home the original single batten fitting rarely does a modern open plan space justice, so we plan a layout that actually works.
New Ceiling Fans for Brentwood Homes
Perth summers stretch on, and a ceiling fan takes the edge off a warm Brentwood bedroom or living room without the running cost of the split system going flat out. A well hung fan keeps air moving through the hottest stretch from December to March and lets you ease back on the cooling.
Our ceiling fan installation covers new fans, straight swaps, and models with a built in light, run off a wall switch or a remote. We anchor the mount to solid ceiling structure so the fan turns without a wobble, and where there is no existing point we run a new circuit for it. On an alfresco or patio we fit a model built to handle the weather so it keeps spinning season after season.
Rewiring Older Brentwood Houses
Some Brentwood homes still hold decades old cabling behind the walls, and the rubber or cloth insulation on wiring that age grows brittle and starts to crack. Roof heat and the odd rodent only hurry it along. Lights that flicker, switches that feel warm, outlets going brown, and circuits that trip for no clear reason all say the wiring has reached the end of its life.
Our house rewiring renews the cabling one circuit at a time or right through the home, fits current safety switches, and lifts everything to today’s standard. We stage the work to keep power on where possible and keep the mess down. A rewire is also the moment to add the extra outlets and circuits a busy household has outgrown its old wiring without.
Getting to the Bottom of an Electrical Fault
An outlet that has gone dead, half the house with no lights, or a breaker that flicks off the instant you reset it all point to a fault buried in the wiring. In an older Brentwood home the trouble often hides in a perished connection, a tired fitting, or a junction that has worked loose over the years, none of which shows up at a glance.
Our electrical fault finding pins the problem down with proper test instruments instead of trial and error, so you are paying to fix the real fault rather than swapping parts and hoping. We move through circuits, joints, and fittings in order, tell you in plain words what has failed, and price the repair before we get on with it.
Emergency Electrician Whenever You Need
Electrical trouble rarely keeps office hours, and a scorched smell at the board, a spark at a socket, or half the house going dark late at night is not something to sit on. In older homes a failing connection can heat up out of sight until it becomes a genuine hazard, and a summer storm can knock the supply about as well.
Our emergency electrician service takes Brentwood calls at any hour and makes things safe before doing anything else. We isolate the danger, hunt down the fault, and put in a repair that lasts rather than a stopgap. If you catch a burning smell, see sparking, or lose power to part of the home, shut it off at the board and get us on the phone.
Mains Powered, Interconnected Smoke Alarms
Western Australia requires working smoke alarms throughout a home, and any alarm fitted today has to be mains powered and interconnected so a single trigger sets them all off together. Battery only units no longer pass when a property changes hands, and quite a few original Brentwood homes are still relying on them.
We install mains powered, interconnected photoelectric alarms in the correct spots through bedrooms, hallways, and living zones. That interconnection earns its keep overnight, when an alarm at the far side of the house can rouse a sleeping family in time to matter. We check where each unit goes, wire them back to the board, and confirm they all sound as one.
EV Charger Installed and Tested
Electric cars are turning up in more Brentwood driveways, and charging one from an ordinary socket is slow and asks a lot of an ageing circuit. A proper wall charger fills the battery far quicker and draws on its own protected line rather than sharing power with everything else in the garage.
We fit home chargers from the well known brands, run the dedicated circuit back to the board, and confirm the board can take the added draw before we begin. On the older boards common around Brentwood that extra load is often the tipping point, so we will flag an upgrade first where it is needed. The charger goes where it suits your driveway or carport, set up so a daily top up is quick and safe.
Wiring for Established 1960s and 70s Brentwood Homes
The character of Brentwood is its original brick and tile family homes on generous blocks, and while they are built to last, their electrics are showing every one of their years. Undersized boards, too few outlets, and lighting that predates open plan living are the pattern we meet on these streets, and a growing number of owners are renovating or rebuilding around them.
When a home is being extended or reworked we bring the wiring up with it, adding circuits, moving points, and lifting the board to carry a modern load. Sitting inland away from the coast means no salt to fight, but age, roof heat, and decades of DIY additions leave their own mess to sort out. We match the work to the era and layout of your particular home.
WA Compliant Electrical Work
Every bit of electrical work in Western Australia has to be done by a licensed electrical worker, and there is good reason for it, since unlicensed wiring is a danger and can void your insurance. All of our work satisfies the wiring rules and state requirements, and we leave a job tested, tidy, and safe rather than hiding shortcuts behind the plaster.
Being fully licensed and insured, we hand over the compliance paperwork once the work wraps up. For owners selling or leasing, that covers getting the RCDs and smoke alarms up to the standard a property has to meet first. If you are not sure whether your Brentwood home measures up, we will look it over and set out exactly what it needs.
Why Locals in Brentwood Rely on Us
People here keep calling us back because we arrive on time, price the job before we start, and ask no call out fee to come and size up the work. Nothing extra appears at the end, and what we quote is what you settle. Our licensed Perth electricians look after your home and leave it clean when they finish.
We know the housing stock in this part of Melville, the ageing boards, the reno half done, the 70s lighting begging for an update, so diagnosis is quicker and the fix is right for the home. From a lone outlet to a whole rewire, you are dealing with tradespeople who do the work properly and put their name to it.
Book Your Brentwood Electrician
Getting us out is simple. Call 1300 632 094, tell us what is going on, and we will offer a time that fits and a clear read on the cost. Many jobs we can reach the same day, and because we work by the day rather than the clock, you are not watching a meter tick over while we track down the fault.
We service Brentwood and the surrounding Melville suburbs for everything from a dead light to a full switchboard replacement. You get a licensed electrician, upfront pricing, no call out fee, and workmanship built to WA standards on every job. Phone 1300 632 094 to grab a time that works around your week, and we will lock in the soonest slot we have.
Frequently Asked Questions
It depends on the work, the parts it needs, and how long it takes, so we price each job on its own before starting. There is no call out fee for us to come and assess it, and the figure we agree upfront is what you pay, with nothing extra tacked on once the work is done. You decide with the full cost in front of you.
Yes. All electrical work in WA has to be carried out by a licensed electrical worker. Wiring done without a licence is illegal, unsafe, and can leave your home insurance void if a fault causes damage. Same Day Trades is fully licensed and insured, and we supply compliance paperwork for every job we finish in Brentwood.
Often, yes. We run vans through the City of Melville daily, so a morning call usually means we reach you before the day is out. For genuine emergencies we attend at any hour. Call 1300 632 094 and we will tell you the earliest time we can get to your street in Brentwood.
We cover Brentwood and the neighbouring Melville suburbs, taking in Bull Creek, Applecross, Booragoon, and the streets around Garden City. Whether your home backs the freeway or sits closer to the river, a local electrician can get to you. Give us a call and we will confirm we service your street.
Yes. Our emergency electricians take Brentwood calls at any hour, weekends and public holidays included. If you notice a burning smell at the board, a spark at a socket, or part of the house losing power, switch it off at the board and phone 1300 632 094. We make things safe first, then track down and repair the fault.
Yes. Western Australian law calls for at least two RCDs, or safety switches, covering the power and lighting circuits in a home, and they must be fitted before a property is sold or leased. Many original Brentwood homes come up short. We test the ones already on the board and add extra RCDs to any circuit left unprotected.
Yes. Beyond family homes we look after rentals, strata blocks, and small commercial sites around Brentwood and Melville. For landlords and managers we sort RCD and smoke alarm compliance ahead of a lease, plus repairs and fit outs. We can invoice and report the way agents and strata managers expect, and every job is quoted upfront.
Always. We look over the job, explain what it involves in plain terms, and set a firm price before any work begins. Coming to assess it costs nothing, and the quoted figure is what you pay. You go ahead only once you have the full cost in front of you, with no pressure either way.
The regulars here are switchboard upgrades on ageing 1960s and 70s boards, renovation rewires and new circuits, and LED downlight upgrades replacing old halogens. Extra power points, ceiling fans for the summer, and fault finding on tired original wiring also come up often as these established family homes get updated.
Yes. Every electrician we send is fully licensed and insured, and all work meets the wiring rules and Western Australian standards. We provide compliance paperwork once the job is complete, and leave everything tested, tidy, and safe. You can book knowing the person on your doorstep is properly qualified for the work in front of them.
Nearby Suburbs We Also Service
Our licensed Perth electricians also cover the suburbs around Brentwood, so if you are close by there is a good chance one of our team is already working nearby.
Applecross, Mount Pleasant, Ardross, Booragoon, Alfred Cove, Myaree, Como, Manning.
Brentwood WA 6153 Service Area
Same Day Trades services Brentwood 6153 and all surrounding suburbs across Perth.
