Electrician Melville
A 1960s brick and tile home on a leafy street near Wireless Hill Park often still runs on the switchboard it was built with, and the moment a renovation adds an island cooktop and a second split system, that old board starts to strain. Licensed Perth electricians work these Melville streets every week, upgrading tired boards, adding circuits, and wiring the extensions that keep spreading across the suburb. We quote upfront, charge no call out fee, and often reach you the same day.
Call 1300 632 094 to book a licensed Melville electrician, whether the job is one power point or a full switchboard replacement, and we will settle on a time that suits.
Same Day Trades Electricians in Melville
Same Day Trades covers Melville week in and week out, working the settled family streets between Melville Plaza and the Swan River. The suburb runs on 1960s and 1970s brick homes alongside newer builds, and we handle both. Whether you own an original house near Canning Highway or a renovated place backing onto Wireless Hill Park, our team turns up on time, talks through the work in plain terms, and quotes before a tool comes out.
Older Melville homes carry their own habits, from switchboards never sized for modern kitchens to circuits stretched thin by extensions and cooling. As part of our wider team of electricians across Perth, we know how Melville properties are wired and pick fittings that suit the setting. From a small repair in an established home to full circuits in a renovation, we cover Melville and the neighbouring City of Melville suburbs.
Your Local Melville Electrician
Melville sits south of the Swan River as a settled family suburb, its streets lined with 1960s and 1970s brick and tile homes and a steady run of newer builds. Same Day Trades wires, repairs, and upgrades properties across the whole area, from the quiet pockets near Wireless Hill Park to the busier stretches around Melville Plaza. Because our vans carry the parts most homes call for, the bulk of jobs finish on the day we arrive.
Maybe you want one outlet added to a home office, a run of downlights through a reworked kitchen, or a decades old board pulled out and replaced. Whatever the scale, licensed Perth electricians handle it from start to finish. We book by the day, put a firm price in front of you before a tool comes out, and never add a call out fee.
Upgrading Your Melville Switchboard
A large share of the original Melville houses still lean on a ceramic fuse board built long before induction cooktops, ducted reverse-cycle systems, and a car charging overnight. Load those demands onto ageing wiring and the board begins tripping, or the enclosure runs warm in a way it never should. Rewireable fuses also leave circuits without the safety switch cover the current rules ask for.
Swapping that board for a modern enclosure clears the trouble. We fit the right number of circuits, spread safety switch cover across power and lighting, and label each one so the next person can read the board at a glance. Our switchboard upgrades bring a tired board up to the standard WA now expects. A board that hums, smells warm, or drops out when a few appliances run together is asking to be replaced, so book it in before it quits.
Safety Switches for Family Homes
WA regulations set a minimum of two safety switches guarding a home’s power and lighting circuits, and those devices must be fitted before a property is sold or leased. Plenty of older Melville homes, particularly the ones still on their first board, get by on one or none, which leaves whole circuits open to a live fault and the shock that can follow.
We test the safety switches already on your board, replace any that fail to cut off, and wire RCDs onto circuits sitting without cover. When one senses current leaking to earth it drops the power in an instant, the split second that stops a shock becoming something far worse. A switch that keeps tripping is usually flagging a genuine fault, so we chase the cause rather than clicking it back on.
Adding Power Points Around the House
Reach behind the lounge or the kitchen bench in an older Melville home and you often find double adaptors stacked on power boards, because the place was wired for a fraction of what a family runs today. Adding proper outlets through the kitchen, bedrooms, garage, and alfresco eases the strain on tired circuits and clears away the trailing leads that catch a foot.
With our power point installation you can add twin sockets, points with USB built in, sealed outdoor outlets, and dedicated lines for an oven, split system, or car charger. Anything mounted outside on a patio gets a weatherproof fitting made for the weather. We run the cabling tidily, make good as we go, and check every socket works before packing up.
Lighting for Living and Renovations
Old halogen downlights cost more than most people realise. They push heat into the roof, dim as they age, and fail sooner than they should, while a modern LED sips power and keeps going for years across the kitchen, living areas, and hallways. Switching them over is one of the fastest ways to bring a Melville power bill down.
Our lighting installation takes in downlights, pendants, garden and security fittings, sensor floods, and full room fit outs when you renovate. On the many Melville renovations we lay out lighting that suits open plan living without throwing glare. We set the layout, choose the colour temperature, and place the switches to match how each room is actually used.
Ceiling Fans for Warm Melville Nights
The river is close, but the breeze does not always reach the back bedrooms, and Melville summers get hot, so a ceiling fan earns its place in local living rooms, bedrooms, and alfresco areas. Keeping the air moving lets you ease off the split system and hold running costs down through the fierce stretch from December to March.
Our ceiling fan installation runs from brand new fans to straight swaps and models with a light built in, driven off a wall switch or a remote. We fix the mount hard into the ceiling frame so nothing wobbles, and where there is no existing point we run a fresh circuit for it. Fans headed for a patio get an outdoor rated model built for the humidity.
Rewiring Older Melville Homes
In some of the older Melville homes the wiring dates back decades, and the rubber or cloth insulation around it turns brittle and splits with age. Heat trapped in the roof and the odd rodent both speed that along. Lights that flicker, switches that feel warm, outlets going brown, and breakers that keep dropping are all signs the cable in the walls is spent.
Our house rewiring pulls out the old cable one circuit at a time or across the whole home, fits current safety switches, and lifts the installation to today’s standard. A renovation is the natural window to lay in fresh circuits for the loads a modern family carries. We phase the work to keep power on where we can and hold the disruption to a minimum.
Fault Finding Done Properly
A power point gone dead, half the house with no lights, or a breaker that flips the instant you reset it all point to a fault hiding in the wiring somewhere. In older Melville homes a worn connection, a failed fitting, or moisture in an outdoor box causes many of these, and no quick glance will reveal it.
Our electrical fault finding traces the trouble back to its source with proper test gear rather than trial and error, so your money goes on the actual repair and not a string of replaced parts. We move through the circuits, connections, and fittings in a set order, explain plainly what has given way, and price the fix before getting on with it.
Emergency Electrical Callouts
Electrical trouble ignores the clock, and a scorched smell at the board, an outlet throwing sparks, or half the house going dark on a hot night all need dealing with quickly. Summer storms rolling across Melville can drop the supply and knock a board about, and moisture reaching a fitting can push a minor fault into a real hazard.
Our emergency electrician service answers Melville calls at any hour and makes things safe before a repair even begins. If you catch a burning smell near the board, see an outlet arcing, or find part of the house suddenly dead, switch off the main and get us on the phone straight away.
Smoke Alarm Compliance
The rules across WA call for working smoke alarms in every home, and anything installed today must run off the mains and be interconnected, so a single alarm sounding sets off the rest. Battery only units fall below the standard the moment a property changes hands, and a good number of older Melville homes are still fitted with them.
We install mains fed, interconnected photoelectric alarms and place them where they belong, through the bedrooms, hallways, and living areas. Linking them matters most in the small hours, when a unit at the far end of a larger family home can wake everyone in time. We work out the placement, wire each one back to the board, and confirm they all sound together before leaving.
Home EV Charger Installation
More Melville driveways carry an electric car every year, and topping one up from an ordinary power point is slow going and hard on an older circuit. A proper wall charger fills the battery a good deal faster and more safely, drawing from its own protected line instead of competing with everything else running in the garage.
We mount chargers from the brands people most often ask for, run a dedicated line back to the switchboard, and confirm the board can carry the added draw before starting. If the existing board is already stretched, we flag an upgrade first so the charger runs without knocking out a circuit. The unit goes wherever suits your driveway, garage, or carport.
Wiring Renovations and Extensions
Renovations are constant across Melville, with owners opening up kitchens, adding a second storey, or extending out the back of a 1970s home. Each of those changes asks more of the wiring, and the original circuits were rarely sized for an island bench, a study full of gear, and multiple split systems running at once.
We wire renovations and extensions from the plans up, laying in the circuits, outlets, and lighting a modern family needs while keeping the rest of the house running. Working alongside your builder, we set out cabling before the walls close, position points where they make sense, and test the lot before sign off so the finished space works the way it should.
Licensed and Compliant Every Time
In Western Australia only a licensed electrical worker may carry out the wiring, and that rule exists because unlicensed work is a hazard and will void an insurance claim. Everything we do lines up with the wiring rules and the state requirements, and we leave a job tested, tidy, and safe, never hiding a shortcut behind the wall.
Our team is fully licensed and insured, and the compliance paperwork lands in your hands once the work wraps up. For anyone selling or renting out a Melville property, that covers bringing the safety switches and smoke alarms up to the mark the law sets before a lease or sale. Not sure where your home stands? We will look it over and lay out plainly what needs doing.
Why Melville Families Call Us
People here keep our number handy because we arrive when we said we would, price the job before it starts, and never bill a fee just to come and assess the work. The figure we agree on is the figure you pay, with nothing bolted on at the end. Licensed Perth electricians look after your home and tidy up before they head off.
We know Melville well, from the settled streets around Wireless Hill Park to the homes near Melville Plaza and the renovations spreading through the older pockets. That familiarity means faster diagnosis and fittings picked to suit the local housing stock, whether the job is a single outlet or a whole rewire handled by tradespeople who stand behind the result.
Book a Melville Electrician
Getting us out is straightforward. Phone 1300 632 094, run through what is happening, and we will land on a time that works for you along with a clear sense of the cost. Many jobs we reach the same day, and because we charge by the day and not the clock, no meter ticks while we track down the fault.
Melville and the City of Melville suburbs around it, from Attadale and Applecross to Bicton, Booragoon, and Palmyra, are all covered, whether it is a flickering light or a switchboard swapped out completely. What you get is a licensed hand at the door, a price settled in advance, no call out fee, and work that meets WA standards on every job. Call 1300 632 094 and we will book the earliest slot.
Frequently Asked Questions
The price turns on the job, the parts it takes, and the time on the tools, so each one is quoted on its own before we begin. Nothing is charged for coming out to assess the work, and the figure we settle on upfront is what you pay. You see the full cost laid out and decide whether to go ahead.
Yes. In WA all electrical work must be handled by a licensed electrical worker. Wiring done without a licence breaks the law, puts the house at risk, and can sink an insurance claim later. Same Day Trades is fully licensed and insured, and the compliance paperwork comes with every Melville job we finish.
Often, yes. With vans working across Melville and the City of Melville, an early call usually means we reach you the same day. Emergencies we take at any hour, day or night. Call 1300 632 094 and we will name the soonest time we can get to your street.
We look after all of Melville and the suburbs beside it, from Attadale and Applecross across to Bicton, Booragoon, and Palmyra. Set back near Wireless Hill Park or closer to Melville Plaza, a local electrician can be with you soon. Give us a call and we will confirm your street and settle a time.
Yes. Our emergency team takes Melville calls at any hour, nights, weekends, and public holidays included. If you catch a burning smell at the board, see an outlet sparking, or lose power to part of the house, cut the main switch and call 1300 632 094. We make things safe first, then find and fix the fault.
Yes. WA law sets a minimum of two safety switches over a home’s power and lighting circuits, and they must be in place before a property is sold or rented. Many older Melville homes do not yet meet that. We test the ones already fitted and add RCDs to any circuit still left open.
Yes. Beyond houses, we handle rental properties, strata complexes, and small commercial sites around Melville. For landlords and managers we sort RCD and smoke alarm compliance ahead of a lease, plus repairs and fit outs. Billing and reporting can follow whatever agents and strata managers need, and every job is quoted before we start.
Always. We size up the job, run through what it involves in plain terms, and hand you a firm price before any work starts. There is no fee to come and assess it, and the quote is what you pay. You decide whether to proceed with the full cost in front of you and no surprises at the end.
The usual run is switchboard upgrades on original homes, full rewires and new circuits during renovations, and considered lighting through open plan living. Extra power points, ceiling fans for the summer heat, and fault finding on a circuit that keeps tripping all come up regularly across the family homes here in Melville.
Yes. Everyone we send out holds a full licence and insurance, and the work squares with the wiring rules and WA standards. Compliance paperwork is handed over once the job is done, and we leave the place clean, checked over, and safe to use. Book knowing the person at your door is qualified to do it right.
Nearby Suburbs We Also Service
Our licensed Perth electricians also cover the suburbs around Melville, so if you are close by there is a good chance one of our team is already working nearby.
Attadale, Willagee, Willagee Central, Palmyra, Bicton, Booragoon, Alfred Cove, Myaree.
Melville WA 6156 Service Area
Same Day Trades services Melville 6156 and all surrounding suburbs across Perth.
