Electrician O’Connor
Along Stock Road and Dowd Street, O’Connor runs on three phase power, with workshops, warehouses, mechanics and trade suppliers leaning on their boards from open to close. A high-bay light banking out over a warehouse floor, an old switchboard humming in a Samson Street unit, or a machine that trips mid shift can stall a full day’s work. Behind the precinct sit pockets of older brick homes with tired wiring. Same Day Trades sends fully licensed and insured electricians across the 6163 postcode for repairs, upgrades and installs.
Phone 1300 632 094 for upfront pricing, no call out fee, and a fully licensed and insured team that can often reach your O’Connor workshop or home the same day.
Same Day Trades Electricians in O'Connor
Licensed Same Day Trades electricians work right across O’Connor, from the workshops, warehouses and trade units along Stock Road and Samson Street to the older brick homes tucked behind the precinct, handling three phase boards, high-bay lighting, power points and urgent faults with upfront pricing.
See the full range our Perth electrician crew covers, then call 1300 632 094 to book a fully licensed and insured team in O’Connor.
Electrical work across the O’Connor trade precinct
O’Connor is built around work. The precinct between Stock Road, Dowd Street and Samson Street is packed with workshops, warehouses, mechanics and trade suppliers, most of them running three phase power and long trading hours. Our electricians work across that whole strip, from a single dead socket in an office to a full board upgrade feeding heavy machinery on a factory floor.
Every job opens with a clear quote, so the cost is settled before any tools come out. There is no call out fee, the pricing stays upfront, and the team is fully licensed and insured. Commercial unit or brick home behind the precinct, the standard of work holds from the first visit to the final tidy up. We know the streets around the precinct, so reaching your door and reading the local building stock is rarely a problem.
Switchboard upgrades for workshops and warehouses
An O’Connor workshop lives and dies by its switchboard. Many units around Samson Street still run boards that were sized decades ago, long before the current mix of compressors, welders, hoists and three phase machinery landed on the floor. If a board buzzes, runs hot, or trips whenever two machines start together, it is overdue for attention.
We fit modern boards with proper RCD protection and clearly labelled circuits, sized around the real load a workshop or warehouse draws. Ask about a switchboard upgrade and we inspect the existing setup, walk you through the options in plain language, and hand over an upfront price first. A tidy, labelled board also makes faults quicker to trace when a shift is on the line.
Power points for units, offices and homes
Trade units and warehouses never seem to have a socket where the work actually happens. Benches lean on trailing leads, office fit-outs outgrow their outlets, and a mezzanine or storage bay often has no dedicated point at all. The older brick homes behind the precinct face the same shortfall, running whole rooms off one tired double socket.
We install fresh power points and replace worn ones, including heavy duty and weatherproof outlets for workshop walls, wash bays and yards. Placement is planned with you so outlets suit the way a unit or home is used, and every install is tested and finished neatly. We can also run dedicated circuits for heavier gear so nothing shares an overloaded line.
High-bay and LED lighting for warehouse floors
Good light changes how safely and quickly an O’Connor floor runs. Old high-bay fittings over a warehouse fade, flicker and cost a fortune to run, while a workshop lit by a few tired battens leaves dark corners over the very benches where accuracy counts. Offices and retail frontages along Stock Road need cleaner, brighter light too.
We handle lighting installs and upgrades, from efficient LED high-bays across a warehouse to task lighting over machinery and crisp downlights in an office. The team advises on layout, output and the warmth of each fitting, swaps failing units, and sets up switching that suits a working space. Yard and security lighting is planned for the exposure so fittings last rather than corroding out.
Ceiling fans for offices, homes and workspaces
A tin roofed unit or a brick home in O’Connor holds heat right through a Perth summer. Upstairs offices, staff rooms and west facing bedrooms turn stuffy fast, and cooling alone does not always move the air where people sit. A well placed fan takes the edge off and cuts the load on other systems.
We install and replace ceiling fans in homes, offices and workspaces, mounting them securely and wiring the switching so speeds are easy to control. For high spaces we advise on the right drop and blade span to actually shift air across the room. Older fans that wobble or hum are checked, rebalanced or swapped for a quieter, more efficient model.
Rewiring for ageing units and brick homes
Plenty of O’Connor’s building stock has been standing a long while. Warehouses and units carry cabling that has been patched and extended over the years, and the older brick homes behind the precinct often still run wiring from a very different era. Warm switch plates, discoloured outlets and circuits that keep tripping all point to insulation that has had enough.
We take on partial and full rewiring, from a single problem circuit to a whole unit or house. The work is planned to keep disruption to trading or home life low, staged around how the space is used, and quoted upfront. Once done, the wiring is tested, properly labelled and brought up to a safe, current standard.
Fault finding when a circuit keeps dropping
A breaker that trips the moment a machine starts, lights that dim across a warehouse, or an outlet that has gone dead can bring an O’Connor operation to a halt. Faults like these rarely announce their cause, and guessing at them wastes a working day and risks making the problem worse.
Our electricians run methodical fault finding, tracing the issue back to its source with proper testing rather than swapping parts and hoping. We check boards, circuits, connections and fittings, explain what we find in plain terms, and quote the repair upfront before going ahead. Whether it is a nuisance trip in a unit or a dead run in a brick home, we track it down and set it right.
Emergency electricians when work cannot stop
Electrical trouble in O’Connor does not wait for a convenient hour. A board that fails mid shift, a burning smell from an outlet, or a sudden loss of power to a cool room or workshop needs a fast, level headed response before stock, gear or safety is put at risk.
Our emergency electricians can often reach O’Connor the same day, make the situation safe first, then quote any repair before the work goes ahead. If it is safe, switch off at the board and call 1300 632 094. We handle the urgent fault, get power back where it belongs, and leave the site tested and secure.
Three phase power for machinery and plant
Much of what runs in O’Connor needs three phase, from compressors and welders to hoists, pumps and production plant. Getting that power to the machine safely means correctly sized cabling, the right protection, and a board that can carry the load without running hot. A weak or undersized supply shows up as tripping, slow starts and premature wear on motors.
Our electricians install and extend three phase circuits, add outlets for new plant, and check that existing supply matches the gear it feeds. We size the cable and protection for the actual draw, terminate everything cleanly, and test the install before it carries load. New machine landing on the floor or an older line struggling, we set the supply up to run it properly.
Exit and emergency lighting for commercial units
Every O’Connor workshop, warehouse and office carries a duty to keep exit and emergency lighting working, so people can leave safely if the power drops. Fittings age, batteries fade, and a unit that has changed hands or layout often has coverage that no longer matches how the floor is actually used.
We install, test and maintain exit signs and emergency lights across commercial premises in the precinct, checking that fittings trigger correctly and hold charge. Where coverage falls short we add fittings to suit the current layout and occupancy. Regular testing is logged so a business stays on top of its obligations and any faulty unit is picked up before it matters.
Machinery and equipment wiring on the floor
Bringing a new machine onto an O’Connor floor is more than plugging it in. Hard wired connections, isolators within reach, correct protection and cabling that stands up to a busy workshop all matter, and a rushed connection becomes a hazard and a source of downtime. Mechanics, fabricators and fit-out shops all lean on this being done right.
We wire and connect machinery and fixed equipment, fit isolation switches where operators can reach them, and run the supply so it matches what the manufacturer calls for. Existing gear that has been relocated is checked and re-terminated properly rather than left on a makeshift lead. The result is equipment that starts reliably and stays safe under daily use.
Commercial fit-outs and unit refurbishments
Units around the O’Connor precinct change hands and change use often, as a warehouse becomes a showroom, a workshop gains an office mezzanine, or a tenant fits out a fresh trade counter. Each change carries an electrical side, from moving circuits and adding points to lighting a new layout and feeding extra load the original board never planned for.
We work with owners, tenants and builders through a fit-out, planning the electrical stages so cabling, points and lighting land in the right places before linings go up. The work is quoted upfront and completed to standard, so a unit comes out of the refit safer, better lit and set up for the business moving in. Timing is planned around trade where we can.
Older brick homes behind the precinct
Behind the workshops and warehouses, O’Connor keeps its pockets of older brick and tile homes, many near Hilton and the Fremantle side. These houses were wired for a lighter era, and today they juggle dishwashers, cooling, home offices and workshops in the shed off one modest board. Nuisance tripping and a shortage of outlets are common complaints.
Our electricians look after these homes as carefully as any commercial job, upgrading boards, adding circuits and points, sorting shed and garage power, and fixing the small faults that creep into ageing wiring. Everything is quoted upfront and left tidy, so a family home behind the precinct runs safely without the constant trips and workarounds.
Safety switches and compliance testing
Safety switches are the difference between a quick trip and a serious shock, yet plenty of older O’Connor units and homes still run boards without proper RCD protection on every circuit. Landlords, business owners and homeowners alike carry a responsibility to keep power safe for the people using the space, and untested installs are a real exposure.
We fit safety switches, test existing protection, and check that boards and circuits meet the current standard. For rentals and commercial premises we can run the testing a lease or insurer expects and flag anything that needs attention. The team explains what each result means in plain terms, and any remedial work is quoted upfront before it goes ahead.
Booking a licensed electrician in O’Connor
Choosing an electrician comes down to trust. You want a team that is licensed, insured, punctual and straight about cost, whether the job is a warehouse rewire or a dead socket in a brick home. Same Day Trades brings licensed Perth electricians to O’Connor, backed by upfront pricing, no call out fee, and crews that respect a working site.
To book, call 1300 632 094 and describe the job. We talk through what is involved, arrange a visit, and give you a quote based on the actual work. From the three phase units along Stock Road to the older homes near Hilton and Beaconsfield, O’Connor has a reliable, fully licensed and insured electrician a phone call away.
Frequently Asked Questions
No. Same Day Trades does not charge a call out fee anywhere in O’Connor. You get upfront pricing agreed before any work starts, and the quote is based on the actual job, whether that is a dead socket in a brick home or a full switchboard upgrade feeding machinery in a Samson Street workshop.
Yes. Much of O’Connor runs on three phase, and we regularly work across the workshops, warehouses and trade units in the precinct. That covers three phase boards and outlets, machinery connections, high-bay lighting and safety switches, all quoted upfront so trading or production is affected as little as the job allows.
Often, yes. We keep electricians working across Fremantle and the surrounding suburbs, so for many O’Connor jobs we can be there the same day. Call 1300 632 094 and we will give you an honest read on timing rather than an empty promise, especially when a fault has stopped work.
Yes, every electrician we send is fully licensed and insured. Electrical work carries real risk, more so around three phase machinery and ageing boards, so each job across O’Connor is completed to standard and properly tested before the team packs up and leaves your site or home.
A board that trips usually points to overload, an ageing switchboard, or a fault on one circuit or machine. In O’Connor units running compressors, welders and hoists, an undersized board is a common culprit. We run proper fault finding, trace the real cause, and quote the fix upfront rather than guessing.
Yes. We replace tired high-bay fittings across O’Connor warehouses with efficient LED units that run brighter and cost less to keep on. We plan the layout for even coverage over the floor and benches, handle the switching, and quote the work upfront before any fittings are changed out.
We do. Commercial premises in O’Connor need working exit and emergency lighting so people can leave safely if power drops. We install fittings to suit your layout, test that they trigger and hold charge, and log the results, adding coverage where a unit’s fit-out has moved on from the original plan.
Yes. O’Connor has pockets of older brick homes near Hilton and Beaconsfield, and we look after them as carefully as any commercial job. That covers switchboard upgrades, extra power points, lighting, shed and garage power, and the small faults that creep into ageing house wiring, all quoted upfront.
Pricing is quote based and upfront. We assess the job, explain what it involves, and agree a price before starting. If something larger turns up once we open a board or trace a fault at an O’Connor property, we stop and talk it through rather than surprising you on the final bill.
If it is safe, switch off power at the board and call 1300 632 094. Our emergency electricians can often reach O’Connor the same day, make the situation safe first, then quote any repair before the work goes ahead. That matters most when a fault has shut down a workshop mid shift.
Nearby Suburbs We Also Service
Our licensed Perth electricians also cover the suburbs around O’Connor, so if you are close by there is a good chance one of our team is already working nearby.
Beaconsfield, South Fremantle, Fremantle, East Fremantle, North Fremantle, Palmyra, Bicton, Hamilton Hill.
O’Connor WA 6163 Service Area
Same Day Trades services O’Connor 6163 and all surrounding suburbs across Perth.
