A warm, sparking or loose power point is a genuine fire and shock risk that should never be ignored. Our licensed electricians repair and replace faulty power points and find the underlying cause.
We can usually attend the same day across Brisbane, Perth and Adelaide, with upfront fixed pricing.
We are local, licensed electricians who do this work every day, so we get it right the first time, with no mess and no shortcuts on safety.
You get safe, tidy, guaranteed workmanship every time, and honest advice on what your home actually needs.
A faulty power point (power outlet) is more than an inconvenience, it can be a fire or shock risk, so never ignore the warning signs:
Any of these means the outlet should be checked by a licensed electrician promptly. A hot outlet or burning smell should be treated as urgent, and you should stop using it straight away.
Power points fail for a handful of common reasons: age and wear, where decades-old outlets simply deteriorate; loose internal wiring connections, which cause arcing, heat and buzzing; overloading, where too much draw through one outlet or a daisy-chained power board overheats it; physical damage to the faceplate or socket; and moisture, especially in kitchens, bathrooms, laundries and outdoors. Loose connections are the most dangerous, because the arcing they cause generates heat that can scorch the outlet and, in the worst case, start a fire behind the wall. That is why a buzzing or warm outlet is never something to live with.
A faulty power point carries two serious risks. The first is fire: loose or arcing connections generate heat inside the wall cavity where you cannot see it, and over time that can ignite surrounding material. The second is electric shock, if a fault allows the outlet casing or a plug to become live. Damaged or cracked outlets, and outlets exposed to moisture, raise the shock risk further. Because the dangerous part of a faulty outlet is usually hidden behind the wall, you cannot judge how serious it is from the outside, so any faulty power point should be inspected and repaired by a licensed electrician.
If a power point has stopped working, the cause could be the outlet itself, the circuit, or a tripped safety device. Before calling, check whether other outlets on the same circuit are also dead, whether a safety switch or breaker has tripped at the switchboard, and whether the appliance works in another outlet. If a safety switch keeps tripping when you reset it, there is a fault that needs finding, not just resetting. We trace the problem with proper fault-finding, whether it is a failed outlet, a loose connection, a damaged cable or a circuit fault, and repair it safely rather than guessing.
Old, cracked, discoloured or loose power points should be replaced, both for safety and because modern outlets are far more convenient. We replace worn single and double outlets, upgrade them to modern designs, and can add USB charging built into the outlet so you can charge phones and tablets without an adapter. Replacing an old outlet is a quick job for a licensed electrician and removes a genuine fire and shock risk. If several of your outlets are the old, loose or cracked type, it is worth doing them together, and we will give you an upfront price for the lot.
Running out of outlets and relying on power boards and extension leads is both inconvenient and a fire risk. Rather than overload one point, we can add new power points wherever you need them, in the kitchen, home office, living room, bedrooms, garage or outdoors. Adding a dedicated outlet for a heavy appliance, a workspace or an entertainment unit removes the tangle of double adapters and keeps everything safe. We run the new wiring neatly, connect it to a suitable circuit, and make sure the circuit is not overloaded, so your new outlets are safe and compliant.
Modern power points do more than run appliances. We install outlets with built-in USB-A and USB-C charging, so you can charge devices directly without taking up a socket or needing an adapter, ideal for bedsides, kitchens and home offices. We also install smart power points that can be switched and scheduled from a phone app or voice assistant, handy for lamps, heaters and appliances you want to control remotely or automate. If you are upgrading your outlets anyway, these are a small extra that make daily life easier, and we are happy to recommend the right type for each room.
Outdoor outlets need to be weatherproof and protected by a safety switch, because moisture and electricity are a dangerous mix. We install weatherproof outdoor power points with proper covers and seals for patios, pergolas, sheds, garages and gardens, so you can safely run outdoor appliances, pumps, tools and lighting. All outdoor and wet-area outlets are installed to the standard with RCD protection. If you have been running an extension lead out a window to power something outside, a proper weatherproof outlet is a far safer and tidier solution.
Safety switches (RCDs) protect you from electric shock by cutting power in a fraction of a second if electricity leaks to earth, and by law outlets in homes increasingly need this protection. If one of your power points trips the safety switch, it usually means there is a genuine fault, a faulty appliance, moisture, or damaged wiring, that the RCD is protecting you from, so it should be investigated rather than repeatedly reset. If your home has no safety switches, or only some circuits are protected, we can add RCD protection at the switchboard, which is one of the most important electrical safety upgrades you can make.
Plugging too much into one outlet, or daisy-chaining power boards and double adapters, is a common cause of overheating and tripped breakers. High-draw appliances like heaters, kettles and dryers pull a lot of current, and overloading a single outlet or circuit generates heat that can damage the outlet and the wiring. The safe fix is to spread the load across more outlets and, where needed, add dedicated circuits for heavy appliances. We can assess how your circuits are loaded and add outlets or circuits so you are not forcing everything through one overworked point, which keeps your home safer and stops nuisance tripping.
When an outlet is faulty, we find the real cause rather than just swapping parts. Our process is to safely isolate the circuit, inspect the outlet and its connections, and use proper testing to trace the fault, whether it is a loose connection, a damaged cable, a failed outlet, moisture, or a problem further back in the circuit. Once we have found it, we repair or replace what is needed and test the outlet and its safety protection before we leave. This approach means the fault is actually fixed, not just hidden, so you are not dealing with the same warm or dead outlet again a few weeks later.
Replacing a single faulty power point is an affordable, quick job. The price depends on whether it is a straight replacement, a new outlet needing fresh wiring, an outdoor weatherproof point, or a fault that needs tracing through the circuit. Adding several outlets, or a dedicated circuit for a heavy appliance, costs more but is often best done together. Rather than give a vague figure, we assess the job and provide an upfront fixed price before we start, so there are no surprises. If we find a wider wiring or switchboard issue, we will explain your options clearly.
Older homes often have ageing outlets, no safety switches, and wiring that was never designed for modern electrical loads. If your home still has old-style outlets that are loose or cracked, few power points per room, or a switchboard with ceramic fuses, it is worth having the electrical system checked. We can replace old outlets, add safety switch protection, and advise whether a switchboard upgrade or partial rewire is needed. Bringing an older home up to modern standards removes real fire and shock risks and makes daily life far more convenient.
A hot, sparking or dead power point is not something to leave, so we offer fast service and same-day appointments where we can across Brisbane, Perth and Adelaide. Our phones are answered around the clock, and if an outlet is sparking, burning or hot, stop using it, switch off the circuit at the switchboard if you can do so safely, and call us. We will get a licensed electrician to you to make it safe and repair it properly, with an upfront fixed price before any work starts.
Working on power points and wiring is licensed electrical work, so it is never a DIY job, and faulty outlets are a genuine fire and shock risk. Our licensed electricians repair, replace and install power points to the AS/NZS 3000 wiring standard, add RCD protection where required, and test everything before we leave. You get safe, tidy, guaranteed workmanship and honest advice on what your home needs. We repair and install power points across Brisbane, Perth and Adelaide, with upfront fixed pricing and same-day help for urgent faults.
A warm outlet usually means an overloaded circuit or loose internal wiring, both of which are fire risks. Stop using it and call an electrician.
Yes. Faulty outlets can cause electric shock, melted wiring and fire. Switch off at the board and have it checked promptly.
No. Repairing or replacing power points is licensed electrical work and must be done by a licensed electrician.
It usually means a fault in the outlet, the wiring or a plugged-in appliance. An electrician can isolate and fix the cause.
Yes. We can upgrade single outlets to double, USB or weatherproof power points to suit how you use the room.
It depends on the fault and whether wiring is involved. We give you an upfront fixed price before we start.
That often points to a tripped circuit, overload or a wiring fault. We will find the cause, which may be a circuit or switchboard issue.
Yes. A faulty power point is a safety risk, so we prioritise it and can usually attend the same day across Brisbane, Perth and Adelaide.
We can all agree that a leaking drain under basin or sink is one of the most common household plumbing issues. Kitchen and bathroom sinks, in particular, are the two most frequented areas in any home.
Are blocked drains or damaged pipes disrupting your plumbing network? Get in touch with us at Same Day Trades for effective solutions at the earliest. When it comes to pipe repairs, you don’t want to cheap out and get it done by a local handyman. Chances are they don’t have the required tools or expertise to carry out fool-proof repairs.
If you notice sudden leaks or rust-riddled water, it may be time to replace taps immediately. Fortunately, you have come to the right place. Contact Same Day Trades for assistance with faulty or damaged taps in your home. There is no point in waiting for the damage to worsen.
Pipes in the plumbing system of some homes may be blocked frequently due to various reasons. Sometimes roots may enter the pipes through the cracks in old plumbing systems.
If you find constant puddles of water or condensation in a portion of the toilet, it means you’re dealing with a leaking toilet! There are many other signs which indicate that your toilet is leaking, such as brown stains on the backside of the toilet bowl or water dripping into the bowl.
If your tap is faulty or looks outdated, you will want to replace it. And you’ve come to the right place for it! To install taps anywhere in your home, the plumbing services of a reputed company are required. At Same Day Trades, we offer our premium-quality installation, repair, and maintenance services for all your needs, in any setting.
There can be multiple causes of a clogged drain, and it can prevent sinks and toilets from working. And snake down drains serve as excellent solutions to the problem. But this can be a messy task, and one wrong move can also break the drain pipe. Hence, it is best to let professionals handle it.
Downpipes carry rainwater from gutters and let it reach the soil to prevent it from splashing or dripping down the roof. This way, the extra pressure is alleviated from the roof.
With hundreds of 5 star reviews, we’re the local tradesmen you can trust.
We make sure you know exactly what you are paying for ahead of time.
You’re in safe hands as our tradesmen are fully licensed and insured to do your job.
Our work will be free of defects in workmanship and workmanship will be warranted for life.
We offer convenient booking times that can be worked around your schedule.
We take calls 24 hours a day and 365 days a year so that we’re always available to be of service.
With hundreds of 5 star reviews, we’re the local tradesmen you can trust.
We make sure you know exactly what you are paying for ahead of time.
You’re in safe hands as our tradesmen are fully licensed and insured to do your job.
Our work will be free of defects in workmanship and workmanship will be warranted for life.
We offer convenient booking times that can be worked around your schedule.
We take calls 24 hours a day and 365 days a year so that we’re always available to be of service.
