
We can all agree that a leaking drain under basin or sink is one of the most common household plumbing issues. Kitchen and bathroom sinks,
A gas point lets you connect an appliance, a heater, cooktop, stove or BBQ, to your mains gas, and installing one is licensed gas fitting that must be done safely by a licensed gas fitter. Our licensed gas fitters install bayonet and fixed gas points, run the gas line from your supply to the new point indoors or outdoors, test the connection for leaks, and provide a gas compliance certificate. A gas bayonet point makes connecting a portable heater easy, and an outdoor point lets you run a BBQ off the mains instead of bottles. We install gas points across Brisbane, Perth and Adelaide, with same-day service where we can and an upfront fixed price.
We are local, licensed and insured plumbers who do this work every day, so we get it right the first time, with no mess and no surprises on the invoice.
Whatever the job, you get honest advice and a tidy, professional result.

A gas point is an outlet that lets you connect a gas appliance to your gas supply, and installing one is licensed gas fitting that must be carried out by a licensed gas fitter. Whether you need a point for a gas heater, a cooktop or stove, or an outdoor BBQ, we run the gas line from your supply to the location and install a compliant gas point, tested for leaks and certified. Gas points come as quick-connect bayonet fittings (common for portable heaters) or fixed outlets for permanent appliances. We install both, safely and to the standard, across Brisbane, Perth and Adelaide, so you can connect your gas appliance where you need it, with an upfront fixed price.
A gas point is the connection outlet between your gas supply and a gas appliance, with an isolating valve so the appliance can be turned off at the point. There are two main types: a bayonet point, a quick-connect fitting that lets you plug in and unplug an appliance easily (commonly used for portable gas heaters, so you can connect the heater in winter and remove it in summer), and a fixed point, a permanent connection for an appliance like a cooktop, stove or hot water unit. We install both types, depending on the appliance and how you want to use it. The point gives you a safe, compliant place to connect your gas appliance.
A very common use for a gas point is a portable gas heater, and a bayonet point is ideal, it is a quick-connect fitting on the wall or floor that lets you plug in the heater in the cooler months and unplug and store it in summer, with the point safely capped by its valve when not in use. We install bayonet gas points for portable heaters in living areas and other rooms, running the gas line from your supply to a convenient spot. This gives you efficient, effective gas heating you can connect and disconnect easily, without a fixed heater taking up space year-round. If you want the convenience of a portable gas heater, we can install the bayonet point it connects to.
Gas cooktops and stoves need a fixed gas point to connect to, and if your kitchen does not have one at the appliance location, or you are relocating the cooktop in a renovation, we install it. We run the gas line to the cooktop or stove position and install a compliant fixed gas point, so the appliance can be connected. This is common when adding a gas cooktop to a kitchen that did not have one, converting from electric, or reconfiguring a kitchen. We install the point, and can connect the cooktop too, testing for leaks and certifying the work. So whether it is a new kitchen or a cooktop in a new spot, we provide the gas point it needs.
An outdoor gas point for a BBQ is a popular, convenient addition, letting you connect your BBQ to the mains gas instead of refilling gas bottles. We run the gas line to your outdoor entertaining area and install a weatherproof outdoor gas point, a bayonet or fixed fitting, so your BBQ has a reliable, bottle-free gas supply. No more running out mid-cook or lugging bottles to be refilled. We run the line safely to the outdoor location, install the point, test it for leaks, and certify it. If you have an outdoor kitchen or just a BBQ on the patio, an outdoor gas point makes outdoor cooking as easy as turning on the gas, and we can install it.
Installing a gas point involves running a gas line from a suitable point in your existing gas supply to the new location, which is the main part of the work. We plan the best route, run the line safely, through walls, under floors, or along appropriate paths, to the new point, sizing it correctly for the appliance it will feed. We also check that your existing supply can handle the additional load, upgrading where needed. Running the gas line correctly and safely, and sizing it for the appliance, is licensed work and the core of installing a gas point properly. We handle it to the standard, so your new gas point has a safe, adequate supply.
Installing a gas point and running the line is licensed gas fitting that must be carried out by a licensed gas fitter, it is never a DIY job, because a mistake can cause a gas leak, fire or explosion. Unlicensed gas work is illegal, dangerous, and voids insurance and warranties. A licensed gas fitter has the training, equipment and legal authority to run the line, install the point, test it for leaks, and issue the compliance certificate that proves it meets the standard. Our gas fitters are fully licensed, so when we install your gas point, it is done safely, legally and with proper certification. Never attempt gas work yourself, it is both illegal and extremely dangerous.
A crucial part of installing a gas point is testing it for leaks before it is used, and providing a compliance certificate once the work is done. After installing the point and running the line, we pressure-test and check the connection with electronic detection to confirm there are no leaks, then provide a gas compliance certificate, your documented proof that the work was carried out by a licensed gas fitter to the Australian Standard. This certificate keeps your insurance and appliance warranties valid and is your record that the gas work is safe and legal. Because our gas fitters are fully licensed, every gas point we install is tested and certified, so you can use it with confidence.
When installing a new gas point, we check that your gas supply and meter can handle the additional appliance, because adding a point and appliance increases the total gas demand, and an undersized supply cannot run everything properly. We size the new line correctly for the appliance it will feed, and confirm the overall supply is adequate, coordinating any upgrade with the gas supplier where needed. This ensures your new gas point and appliance get the gas they need to run correctly, without starving your other gas appliances. Checking the supply and sizing the line correctly is part of installing a gas point properly, which our licensed gas fitters handle as standard.
As well as installing gas points, we can safely cap off or remove ones no longer needed, for example when removing a gas appliance, reconfiguring a kitchen, or decommissioning part of the gas system. A disused gas point must be safely capped by a licensed gas fitter so there is no leak or hazard, not just left. We safely cap or remove gas points, test the system, and certify the work, so a redundant gas connection is made safe properly. If you are removing a gas appliance or reworking your gas setup, we can cap off the points you no longer need, as well as install new ones, so your gas system is safe and suits your current needs.
The cost of installing a gas point depends mainly on how far the gas line needs to run from your existing supply to the new point, the access along that route, and the type of point. A point close to the existing gas line is a smaller job than one run a long way or to an outdoor or hard-to-reach location. We assess what is needed and give you an upfront fixed price before we start, including the line, the point, leak testing and the compliance certificate. We will explain what running the line to your chosen location involves, so there are no surprises, and the gas point installation is clear and properly priced.
Installing a gas point and running the line is licensed gas fitting that must be done safely, tested for leaks, and certified, it is never a DIY job. Our fully licensed gas fitters install bayonet and fixed gas points for heaters, cooktops, stoves and BBQs, run the gas line from your supply, check the supply capacity, test for leaks, and provide a gas compliance certificate, and can safely cap off points no longer needed. You get a safe, compliant, certified gas point, honest advice, upfront fixed pricing and guaranteed workmanship. For licensed gas fitters near you to install a gas point, we cover Brisbane, Perth and Adelaide, with same-day service where we can.
Yes. Our licensed gas fitters install gas points, bayonet fittings and fixed outlets, for appliances like heaters, cooktops, stoves and BBQs, running the gas line from your supply to the point.
A bayonet point is a quick-connect gas outlet, commonly used for portable gas heaters, letting you plug in and remove the appliance easily. We install these and fixed points.
Yes. We install outdoor gas points for BBQs, so you can connect your BBQ to the mains gas instead of refilling bottles.
Yes. Installing a gas point and running the line is licensed gas fitting. We are fully licensed and provide a compliance certificate.
Yes. We test the new gas point for leaks and provide a gas compliance certificate, your proof it is safe and legal.
Yes. We run the gas line from your existing supply to a new point wherever you need it, indoors or outdoors.
It depends on the distance the gas line runs and the type of point. We give you an upfront fixed price before we start.
Yes, our licensed gas fitters install gas points across Brisbane, Perth and Adelaide, with same-day service where we can.

We can all agree that a leaking drain under basin or sink is one of the most common household plumbing issues. Kitchen and bathroom sinks,

Are blocked drains or damaged pipes disrupting your plumbing network? Get in touch with us at Same Day Trades for effective solutions at the earliest.

If you notice sudden leaks or rust-riddled water, it may be time to replace taps immediately. Fortunately, you have come to the right place. Contact

Pipes in the plumbing system of some homes may be blocked frequently due to various reasons. Sometimes roots may enter the pipes through the cracks

If you find constant puddles of water or condensation in a portion of the toilet, it means you’re dealing with a leaking toilet! There are

If your tap is faulty or looks outdated, you will want to replace it. And you’ve come to the right place for it! To install

There can be multiple causes of a clogged drain, and it can prevent sinks and toilets from working. And snake down drains serve as excellent

Downpipes carry rainwater from gutters and let it reach the soil to prevent it from splashing or dripping down the roof. This way, the extra

With hundreds of 5 star reviews, we’re the local tradesmen you can trust.

We make sure you know exactly what you are paying for ahead of time.
You’re in safe hands as our tradesmen are fully licensed and insured to do your job.


Our work will be free of defects in workmanship and workmanship will be warranted for life.

We offer convenient booking times that can be worked around your schedule.

We take calls 24 hours a day and 365 days a year so that we’re always available to be of service.

With hundreds of 5 star reviews, we’re the local tradesmen you can trust.

We make sure you know exactly what you are paying for ahead of time.
You’re in safe hands as our tradesmen are fully licensed and insured to do your job.

Our work will be free of defects in workmanship and workmanship will be warranted for life.

We offer convenient booking times that can be worked around your schedule.

We take calls 24 hours a day and 365 days a year so that we’re always available to be of service.