Electrician Bateman
Homeowners across Bateman can call on licensed Perth electricians for anything from adding a single power point to bringing a full switchboard up to standard. You know the price upfront before we start, there is no call out fee, and an early booking often means same day service.
Call 1300 632 094 to book a licensed electrician in Bateman.
Same Day Trades Electricians in Bateman
Same Day Trades is a regular sight on Bateman streets, working through the settled 1970s and 1980s brick-and-tile homes that fill the suburb and the growing number being renovated or rebuilt. Sitting inland in the City of Melville near Bull Creek, Murdoch University, and Fiona Stanley Hospital, the area is full of good-sized family blocks that have seen decades of use out of their original wiring. We handle jobs of every scale, from a nagging fault to a planned upgrade, and we always name a price before the work begins.
A lot of what we see in Bateman comes down to age: boards that predate ducted air and induction cooking, circuits stretched by extra bedrooms and studies, and lighting still running hot halogens. Backed by the wider team of Perth electricians, we match each fix to the home in front of us and turn up when we said we would. From a renovation rewire to a fresh set of downlights, Bateman households know who to call.
Bateman Electricians Ready to Help
Bateman is one of those steady, tree-lined pockets of the City of Melville where families settle for the long haul, and most of its homes date from the 1970s and 1980s building boom. Same Day Trades looks after the lot, from the untouched originals to the ones part way through a full renovation. Our vans carry the common parts, so the majority of jobs wrap up on the first visit.
Need a single outlet added in a study, downlights run through a made-over kitchen, or a whole board swapped in a tired old house? Our licensed Perth electricians do all of it. We schedule work by the day, hand you a clear price before starting, and there is never a fee just to come and take a look. One team stays with your job from the first phone call through to the final test.
Upgrading Dated Switchboards
Walk into a lot of original Bateman homes and you will find a ceramic fuse board that was wired long before ducted reverse-cycle systems, second fridges, and car chargers turned up. Loaded like that, an old board runs hot and drops out under the weight of appliances it was never designed to carry. Rewireable fuses also mean the house has no proper safety switch cover on its circuits.
We pull out the dated gear, install a modern enclosure with the right circuit count, and label every breaker so you can see what does what. Our switchboard upgrades meet current WA standards and put RCD protection across both power and lighting. If the board hums, feels warm to the touch, or drops out every time two appliances run at once, get it replaced before it lets you down for good.
Safety Switches for Every Circuit
Under Western Australian rules a home has to have a minimum of two RCDs guarding its power and lighting circuits, and those safety switches must be fitted before the place is sold or handed to a tenant. Given how many Bateman houses still run on their first board, plenty sit with a single RCD or none, which leaves entire circuits open to a live fault that can badly hurt someone.
We put your existing safety switches through a trip test, swap out any that fail, and add RCDs on any circuit left exposed. A healthy safety switch drops the power within milliseconds of sensing current leaking to earth, which is frequently what stands between a nasty shock and a fatal one. When an RCD keeps tripping, treat it as a real warning rather than an annoyance, and we chase down the underlying cause instead of just flicking it back on.
Extra Power Points for Modern Living
Homes built in Bateman forty or fifty years ago came with a handful of outlets per room, nowhere near enough for how families live now, so double adaptors and trailing power boards creep across the skirting. Adding sockets in the kitchen, bedrooms, home office, garage, and patio spreads the load properly and clears away the cords people trip over.
Our power point installation takes in standard double outlets, USB points, weatherproof sockets for outdoors, and dedicated lines for ovens, split systems, and car chargers. With so many local homes being renovated, we often add points as part of a kitchen or living overhaul. We run cable tidily, make good as we go, and prove every outlet works before packing up.
Swapping Old Lights for LED
Ripping out old halogen downlights in favour of LED is about the fastest saving a Bateman household can make on its power bill, and it takes a real heat load out of the roof space at the same time. Halogens burn hot, dim as they age, and blow often, while LEDs sip power and keep going for years across kitchens, family rooms, and hallways.
Our lighting installation handles downlights, pendants, outdoor and security lights, sensor floods, and complete room fit outs during a renovation. On these established blocks with mature gardens, well-placed exterior and pathway lighting makes a real difference to how safe the yard feels after dark. We help you plan the layout, pick the right colour temperature, and put switches where they suit how you actually move through the house.
Ceiling Fan Wiring and Supply
Perth summers stretch on, and a ceiling fan is a cheap way to stay comfortable in Bateman bedrooms and living areas without leaning on the split system all day. Set one up right and it keeps air moving, eases the load on your cooling, and trims running costs across the hottest stretch from December into March.
Our ceiling fan installation covers brand new fans, straight replacements, and models with a built-in light, wired to a wall switch or a remote. We anchor the mount firmly into the ceiling frame so there is no wobble down the track, and where a room has no existing point we run a fresh circuit for it. Alfresco and patio fans get outdoor-rated models suited to these leafy backyards.
Rewiring Homes Room by Room or Whole
A good number of Bateman homes still carry the cabling they were built with, and after forty or fifty years the older insulation grows brittle and starts to crack. Roof heat and the odd rodent only hurry things along. Lights that flicker, switches that feel warm, outlets going brown at the edges, and breakers tripping for no clear reason all say the wiring in the walls is past its prime.
Our house rewiring renews the cabling one circuit at a time or right across the home, fits modern safety switches, and lifts everything to today’s standards. We stage the work so power stays on where possible and the household keeps running. A rewire is also the moment to build in the extra outlets and circuits a busy family home now depends on.
Sorting Out Circuits That Trip
A power point that has gone dead, half the house left without lights, or a breaker that flips the instant you reset it all point to a fault tucked away somewhere in the wiring. In older Bateman homes the usual suspects are worn connections in the switchboard, a failing outlet, or cable damage hidden behind a wall from a past renovation.
Our electrical fault finding traces the problem back to its origin with proper meters and test gear rather than trial and error, so your money goes on the real repair instead of swapped-out parts on a hunch. We work through circuits, joints, and fittings in order, explain in plain words what has gone wrong, and price the fix before we start it.
Same Day Emergency Electrical Help
Electrical trouble rarely keeps to office hours, and a scorched smell at the board, sparks at a socket, or half the house going dark on a warm evening cannot sit until morning. A summer storm sweeping across the metro can also knock supply about and damage a board, and any fault near water is one to take seriously straight away.
Whenever it strikes, our emergency electrician team takes Bateman calls day or night and makes things safe before touching anything else. We shut down the hazard, track the fault, and carry out a proper repair rather than a stopgap. If you catch a burning smell, spot sparking, or lose power to just part of the home, kill it at the board and phone us.
Smoke Alarms Wired and Connected
WA regulations call for working smoke alarms in every home, and any fitted these days have to be mains-powered and interconnected so a single trigger sets the whole set off together. Battery-only units no longer pass when a property changes hands, and a fair share of longstanding Bateman homes are still relying on them.
We install mains-powered, interconnected photoelectric alarms in the correct spots through bedrooms, hallways, and living zones. That linking counts most in the small hours, when an alarm at the far end of the house can rouse a sleeping family with time to spare. We work out the right placement, wire each unit back to the board, and confirm they all sound as one.
Dedicated EV Charger Circuits
Electric cars are showing up on more Bateman driveways every year, and topping one up through an ordinary outlet is slow and puts strain on an older circuit. A proper wall charger refills the battery far quicker and runs on its own protected line rather than sharing with everything else in the garage.
We fit home chargers from the well-known brands, run a dedicated circuit back to the switchboard, and confirm the board can handle the added draw before we begin. On the many original boards around here that are already near capacity, we will talk you through an upgrade first so the charger runs without nuisance trips. We site the unit to suit your carport, garage, or driveway and set it up for quick, safe daily charging.
Rewiring for Established 1970s and 1980s Homes
The character of Bateman is its brick-and-tile family homes from the seventies and eighties, sitting on generous blocks that have raised more than one generation. Set inland with no coastal salt to contend with, the wear here is about age and load rather than corrosion: original boards, undersized circuits, and wiring that has done decades of service.
With so many owners now renovating or rebuilding, we spend a lot of time weaving new work into old, from adding circuits for a modern kitchen to sorting out wiring uncovered mid-project. We check earthing and connections on these older installations, flag anything that no longer measures up, and fit the work to the age and layout of your particular home.
Built to WA Electrical Standards
In Western Australia every bit of electrical work has to be done by a licensed electrical worker, and with good reason, because unlicensed wiring is a genuine danger and can wipe out your insurance cover. Each job we complete satisfies the wiring rules and state requirements, and we leave it tested, tidy, and safe rather than hiding shortcuts behind the plaster.
Being fully licensed and insured, we hand over the compliance paperwork once the work is signed off. If you are selling or leasing, that covers getting RCDs and smoke alarms up to the standard the sale or tenancy demands. Not sure whether your Bateman home stacks up? We will inspect it and lay out exactly what needs doing.
Why Bateman Locals Choose Us
People here keep calling us back because we arrive on time, set the price before we begin, and never tack on a fee just to assess the job. Nothing extra appears at the end, and what we quote is what you settle. Our licensed Perth electricians look after your home while they work and tidy up before they head off.
We know this corner of Melville well, from the older streets near Bull Creek to the homes close to Murdoch University and the hospital precinct. That familiarity means quicker diagnosis and choices suited to these ageing family homes and the renovations reshaping them. Whether it is one outlet or a complete rewire, you are dealing with tradespeople who do it properly and back their work.
Booking Your Bateman Electrician
Getting us out is simple. Phone 1300 632 094, describe what is going on, and we will give you a suitable time along with a clear sense of the cost. Plenty of jobs can be done the same day, and because we charge by the job rather than the clock, you are not watching a meter run while we find the fault.
We serve Bateman and the neighbouring Melville suburbs for everything from a flickering downlight to a full switchboard replacement. Every visit brings a licensed electrician, upfront pricing, no call out fee, and workmanship that meets WA standards. Call 1300 632 094 to book a slot that fits your week, and we will lock in the soonest time we have free.
Frequently Asked Questions
It depends on the job, the parts needed, and how long the work runs, so we price each one individually before starting. There is no fee to come out and assess it, and the figure we agree at the front is what you pay at the end, with nothing extra bolted on once the work is done.
You do. Every piece of electrical work in WA has to be carried out by a licensed electrical worker. Unlicensed wiring is against the law, it is dangerous, and it can void your home insurance if something goes wrong. Same Day Trades is fully licensed and insured, and we supply the compliance paperwork on every job we finish.
Frequently, yes. We keep electricians working around Bateman and the wider Melville area, so a morning call often means we reach you before the day is out. Emergencies we handle any hour. Phone 1300 632 094 and we will tell you the earliest we can be at your door.
We look after all of Bateman and the surrounding City of Melville suburbs, taking in the streets near Bull Creek, Murdoch University, and the Fiona Stanley precinct. Wherever your home sits, a local electrician can get to it. Give us a call and we will confirm we cover your particular street.
We do. Our emergency electricians take Bateman calls at any hour, weekends and public holidays included. If you notice a burning smell at the board, see a socket sparking, or lose power to part of the house, switch it off at the board and phone 1300 632 094. We make it safe first, then track down and repair the fault.
Yes. Western Australian law sets a minimum of two RCDs guarding the power and lighting circuits in a home, and they have to be in place before the property is sold or leased. A lot of original Bateman homes come up short. We trip-test the ones you have and add RCDs wherever a circuit is left unprotected.
Yes. As well as houses, we service rental properties, strata blocks, and small commercial sites throughout the Bateman area. For landlords and managers we sort RCD and smoke alarm compliance ahead of a lease, plus repairs and fit outs. We can invoice and report the way agents and strata managers need, and we quote every job in advance.
Every time. We look over the job, talk you through what it involves in plain language, and set a firm price before any work begins. There is no call out fee for the visit, and the quoted amount is what you pay. With the full cost in front of you, the decision to go ahead is yours.
The regulars are switchboard upgrades on the original 1970s and 1980s homes, extra power points and LED downlights, ceiling fans for the summer, and fault finding when a circuit keeps tripping. With so much renovation happening locally, rewires and new circuits for updated kitchens and extensions come up a lot too.
Yes. Everyone we send is fully licensed and insured, and all the work meets the wiring rules and Western Australian standards. We provide the compliance paperwork once the job is complete, and we leave the site tested, clean, and safe. You can book knowing the person at your door is qualified for the work.
Nearby Suburbs We Also Service
Our licensed Perth electricians also cover the suburbs around Bateman, so if you are close by there is a good chance one of our team is already working nearby.
Winthrop, Murdoch, Leeming, Bull Creek, Booragoon, Alfred Cove, Myaree, Melville.
Bateman WA 6150 Service Area
Same Day Trades services Bateman 6150 and all surrounding suburbs across Perth.
